Page 3 of 3 FirstFirst 123
Results 41 to 51 of 51
  1. Member
    Join Date
    May 2006
    Location
    louisville
    Posts
    775
    #41
    I just got the razor.
    I don't have any of the same props that I had with the 8" plate except the 25 fury.
    And I can't definitively comepare speeds. I've changed allot boats loaded different. Hard to say.
    But I don't think it made much difference really. Overall handling is definitely better with the 14" hydraulic.
    Cody Greenwell
    GPS/SONAR/SIDE IMAGING
    Setup Advice & On-the-Water Training

    UofL Fishing Alum
    Team L-Raisin' Anglers



  2. Member
    Join Date
    Nov 2010
    Location
    Dallas
    Posts
    2,913
    #42
    Quote Originally Posted by Gungle George View Post
    I run a Tempest 25" on a 216/XB250. 75 with load @ sea level. It would be interesting to see how a Fury would work. I'm just a little reluctant to shell out 500 bucks to gain 2 measly mph.

    Cheers,

    George
    What size jackplate do you have?

  3. Member
    Join Date
    Nov 2005
    Location
    Albuquerque
    Posts
    657
    #43
    Quote Originally Posted by Sports1 View Post
    What size jackplate do you have?
    12" plate.

  4. Member
    Join Date
    Nov 2010
    Location
    Dallas
    Posts
    2,913
    #44
    Quote Originally Posted by Gungle George View Post
    12" plate.
    Is it hydraulic or standard?
    Last edited by Sports1; 04-19-2018 at 09:47 AM.

  5. Member
    Join Date
    May 2006
    Location
    louisville
    Posts
    775
    #45
    Sports. You sent me a PM and it says i cant respond your inbox is full.

    But yes these are GPS speeds i am posting and RPM from smartcraft monitor.
    Cody Greenwell
    GPS/SONAR/SIDE IMAGING
    Setup Advice & On-the-Water Training

    UofL Fishing Alum
    Team L-Raisin' Anglers



  6. Member
    Join Date
    Nov 2010
    Location
    Dallas
    Posts
    2,913
    #46
    Gotcha.

    I remember reading on a much earlier post on another site (maybe scream and fly or something like that) you post some non GPS numbers. Thanks for the input.
    Last edited by Sports1; 05-22-2018 at 06:30 AM.

  7. Member
    Join Date
    May 2006
    Location
    louisville
    Posts
    775
    #47
    Little update for you.
    Blew my lower unit out. Got a new one.
    And got a 24 Bravo 1 XS.

    Ran it today as well as the ot4 for comparison.

    24 Bravo 1 XS 65.5@5750, 2.5" below pad.
    Can hit 66 but drop to 12psi water pressure when I raised the plate any higher.
    26 OT4 66.7@5050 3" below pad

    Air temps about 80deg
    Cody Greenwell
    GPS/SONAR/SIDE IMAGING
    Setup Advice & On-the-Water Training

    UofL Fishing Alum
    Team L-Raisin' Anglers



  8. Member
    Join Date
    Jul 2015
    Location
    Missouri
    Posts
    14
    #48
    I have a 99 201d and I run a 25 tempest plus, 69 by myself loaded down with good hole shot till I fill the livewells then it's just decent, only turning 5600 rpm though, tried the 26 trophy but only ran 66, just got it back from getting worked so waiting to run it and also bought a 24 fury 3, I'll post back after the weekend

  9. Member
    Join Date
    Jul 2015
    Location
    Missouri
    Posts
    14
    #49
    Ran the 26 trophy today, slipped a little bit and only got 63 mph, threw on the 24 fury 3, ran 66 with 1 person, loaded down and full tank of gas, up on plane like a rocket, filled the livewells, still up on plane like a rocket

  10. Member
    Join Date
    Mar 2012
    Location
    Des Moines
    Posts
    34
    #50
    I had a 26 pitch 4 blade Trophy on my 2000 201 with a 225 Opti and I couldn't spin it fast enough to power load the boat on the trailer. I was turning it 5400 rpm's and pushing my boat around 66 mph. I just put a 24 pitch 3 blade fury on it and not only can I power load the boat I'm turning 6800 RPM's and almost 70mph. That is with no plugs and right out of the box. I'm kind of wishing I went to a 23 but this one seems to be working just fine.

  11. Member
    Join Date
    Nov 2010
    Location
    Dallas
    Posts
    2,913
    #51
    Quote Originally Posted by MilesCoffin View Post
    I had a 26 pitch 4 blade Trophy on my 2000 201 with a 225 Opti and I couldn't spin it fast enough to power load the boat on the trailer. I was turning it 5400 rpm's and pushing my boat around 66 mph. I just put a 24 pitch 3 blade fury on it and not only can I power load the boat I'm turning 6800 RPM's and almost 70mph. That is with no plugs and right out of the box. I'm kind of wishing I went to a 23 but this one seems to be working just fine.
    5800 rom’s?

Page 3 of 3 FirstFirst 123