Can you tell me where you purchased the bug decal ? do you know how many colors that it comes in ? Thanks
Finally made it to get the boat out of storage Saturday. Started getting her ready for the trip in a few weeks. Replaces the rod holders. Installed led light strips in the compartments. Removed the 194 bulb from the courtesy light and installed two blue three led light strips inside the housing. Also put one blue strip under the console. Have enough blue strips to do four on the front and four on he rear deck, just have not made up my mind if I want to install them on the decks or not.
Very nice!
Kerry Copeland
2015 Skeeter ZX250/250 SHO
Decatur, Alabama
IMG_0542.jpgBlueWater LED'S mounted in the rub rail
Bill Perry
Zwolle, LA (Toledo Bend)
bpicinc_2000@yahoo.com
2001 ZX-250 VMAX 225. HDS-9 Carbon, HDS-7Carbon, 3D Sonar, HB 998c hd si, Active Target, MG Tour Pro 36v, 12" Slide Master
USN, USS Newport News CA-148
Little more I have done lately.
CAM00110.jpgCAM00116.jpgCAM00114.jpgJust a couple of projects Ive been working on. Trimmed out the trolling motor pedal and Im machining my own deck lights. Im going with the red, just experimenting with the blue. I don't have them installed yet, I still need to design and machine a dropdown extension from the console to mount switches.
Sweet...how exactly are you making these? Interested
I like that. My TM pedal is all over the place inside the tray. I think I'll look into making something similar. Thanks for sharing the idea
They are cnc machined, I make them myself.
That foot pedal piece is very nice! definite "Skeeter Swag"!
Kerry Copeland
2015 Skeeter ZX250/250 SHO
Decatur, Alabama
[That foot pedal piece is very nice! definite "Skeeter Swag"!]
Thanks, It will also have a cupholder in the front of the pedal and led lights underneath so you can s the outline of pedal in the dark.
Murray State Alum
2007 Champion 210 with all the toys
The pedal cutout is cnc machined from polypropelene sheet plastic 3/4 thick.
Just installed NightFishion on the Skeeter SL.
If you purchased the same poly cord as I did it has little stretch. Mine will retract a little but still lays on the deck. You could tie a piece of bungee cord to the cord and then tie the bungee off where you hooked the poly cord originally under the top cap and use the bungee to retract.
I purchased 3/16th para cord from amazon to replace mine with. Works great. They retract as tight as you want by the length you cut it. Comes in alot of colors. Here is a link to what I bought.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
2006 skeeter zx225.HPDI 225