Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    May 2013
    Location
    ontario
    Posts
    622

    Talon on my fish and ski

    My talon just landed. Hopefully next couple weeks or so get it Mounted and have some pics. Going to try a direct mount to transom.. brackets hang talon out way too far.
    👍👍
    Nitro2023 triton allure 250 proxs
    Garmin marine
    prostaff


  2. Member Bass_Por's Avatar
    Join Date
    Aug 2012
    Location
    VA
    Posts
    307
    #2
    Good luck! I know you saw my post with pics from my install bc you commented on it, so I'll just offer one word of advice: Make sure you can get to the inside of the transom where you plan to direct mount, and reinforce it if needed. I think those direct mounts are designed to bolt through the transom wood for strength.

  3. Member
    Join Date
    May 2013
    Location
    ontario
    Posts
    622
    #3
    Ya my thick reinforced flat part of transom should be wide enough..It looks like it will fit on that . I just have to move transom tie to jackplate.. Boat still covered. But be home soon
    Nitro2023 triton allure 250 proxs
    Garmin marine
    prostaff


  4. Member
    Join Date
    May 2013
    Location
    ontario
    Posts
    622
    #4
    Talon fit perfect.. motor can't hit and didn't take up whole side of transom. Got all the bolts on meaty part of transom.

    2017-04-02 19.30.26.jpg
    2017-04-02 19.30.50.jpg
    2017-04-02 19.31.27.jpg
    Nitro2023 triton allure 250 proxs
    Garmin marine
    prostaff


  5. Member
    Join Date
    Jul 2013
    Location
    Richland, WA
    Posts
    614
    #5
    12'?
    John Wolff
    2003 Allison XB21 2+2
    2003 Mercury 250xs

  6. Member
    Join Date
    May 2013
    Location
    ontario
    Posts
    622
    #6
    Ya a 12
    Nitro2023 triton allure 250 proxs
    Garmin marine
    prostaff


  7. Member Bass_Por's Avatar
    Join Date
    Aug 2012
    Location
    VA
    Posts
    307
    #7
    You're going to love it!

  8. Member
    Join Date
    Jan 2012
    Location
    Nixa, MO
    Posts
    3,231
    #8
    Good job...