Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Mar 2014
    Location
    Virginia Beach
    Posts
    231

    19XS Bunk Board and Transom Alignment

    Question for 19 XS owners (or any I guess) with Marine Master trailers. My boats transom is directly over the rear brackets; however, the bunks stick out about 4 inches past the transom when loaded. Is this an issue? Has anyone else noticed this? If my bunks were cut even with the back bracket they would be flush with the transom. It seems the back bracket should be supporting the weight, but it also doesn't look quite right. I cannot move the front post any further back either because of how the trailer is built. .


    Last edited by Maine-Basser; 03-24-2017 at 04:46 PM. Reason: Inserted Image
    Steve Bailey
    2019 Ranger Z520C
    2019 Mercury 250L Pro XS TM
    SER# 2B575047

  2. Member crank68's Avatar
    Join Date
    Mar 2011
    Location
    Kenly, NC
    Posts
    17,437
    #2
    You should be good....
    BULLET 20 XRD/250 Merc Sport XS
    www.ncboatguy.com

  3. Banned
    Join Date
    Jun 2009
    Location
    Lake Ivie, Texas
    Posts
    16,400
    #3
    Mine do the same on my 22trx as well as my last 21xs boats, no big deal.

  4. Member
    Join Date
    Mar 2014
    Location
    Virginia Beach
    Posts
    231
    #4
    Quote Originally Posted by TritonMan250 View Post
    Mine do the same on my 22trx as well as my last 21xs boats, no big deal.
    Thanks; Does your bow rise up a little when you unhook your bow strap? Added two 10' Talons and replaced my Lead Acid Batteries with AGM and when I unhook my bow strap the bow rises up a little.

    Last edited by Maine-Basser; 03-24-2017 at 04:47 PM. Reason: Inserted Image
    Steve Bailey
    2019 Ranger Z520C
    2019 Mercury 250L Pro XS TM
    SER# 2B575047