Project boat, got a pretty big gas leak inside the boat. Can see it trickling by the bilge pump area. Assume I must have a cracked tank. Anyone taken one of these out?
Project boat, got a pretty big gas leak inside the boat. Can see it trickling by the bilge pump area. Assume I must have a cracked tank. Anyone taken one of these out?
Tim Yancey, Broken Arrow OK
Stroker/300x
Gblanks Custom Rods
Take it to charger they have a vacuum pump
So I take its not an easy task if you have to collapse the tank some
Tim Yancey, Broken Arrow OK
Stroker/300x
Gblanks Custom Rods
I would call Jim Hughes on Tuesday he is the one that built them and will be very helpful in removing the tank.
not easy at all i have done 3 myself had to cut the rear bulkhead out to each livewell them put a vacume pump on it and make sure all other fitting are airtight ,them suck it up into a ball and removeit.the oposite in revers and you hope balling it up dont crack the tank . hope this helps
Reply With Quote
Originally Posted by SOL
