I have 2 898s and an 1159 and I-pilot link all connected via an AS ETH 5ps switch.
I am planning to upgrade the 1159 to a Helix 10 Mega SI.
The question is. Do I need to change to the AS ETH 5PXG ?
Thanks.
I have 2 898s and an 1159 and I-pilot link all connected via an AS ETH 5ps switch.
I am planning to upgrade the 1159 to a Helix 10 Mega SI.
The question is. Do I need to change to the AS ETH 5PXG ?
Thanks.
I'd give it a try and see what happens .... I think most of the issues with the old switch were when there was a large amount of data like with the 360. Humminbird did also change some things in their Ethernet protocol.
What software versions do you have on your current units?
__________________________________________________ ___
**Looking for the one that makes it all worthwhile**
__________________________________________________ ___
Units ..... 1197 (6.310) ...1198 (6.490) ... Helix 12 MSI G3N
HELIX, ONIX, and SOLIX will not work with the AS ETH 5PS, you would need the AS ETH 5PXG.
Deborah @ Humminbird
Thanks for the answer.
Bummer that I need a new switch if I decide to upgrade.
Richard Woods VA Beach,VA
US Navy ETC/SS Retired
SKEETER ZX225 / 225 SHO W/Power Pole CHARGE
GET HER DONE! (Helix 10 G3, 12 G3,Garmin ECHOMAP 106 /livescope and M360 Bow all NMEA2k)
Relion lithium batteries for T/M and LithiumPro for Motor)