During the priming pole went down but wont come up at all! Other side worked fine any suggestions.
During the priming pole went down but wont come up at all! Other side worked fine any suggestions.
whats the pump doing? is it making any noise? Did you check to make sure you have plenty of fluid in the pump tank?
Yes with noise and yes too fluid they are brand new doing this right out of box one of them the other is working fine . There is no fluid going too the blue line at all.
Mine was doing the same thing while priming with the dash switch, ended up using the HPU buttons to get it primed, now they both work fine
Nitro Z-7
2009 Nitro Z-7, 150 Optimax, 24P Tempest Plus, Hydraulic steering, Minn Kota Fortrex Tm, Hummingbird 859c HD DI Ram mounted on bow, Hummingbird 859c HD Ram mounted by dash, Elite 5X mounted in console, 4 bank Delta view charger, 8" Z Lock Pro-Hi Jacker, Hot Foot, Pro Trim and Dual PP.
61 MPH GPS
Fishing is life
Life is fishing
Great support from hydrilla gear and power pole. Got a new pump on the way thanks