I've been looking for the required plug gap for a 2010 Opti 150. The plugs are IZFR5G NGK Iridiums.
Thanks
I've been looking for the required plug gap for a 2010 Opti 150. The plugs are IZFR5G NGK Iridiums.
Thanks
Information is here:
http://www.bbcboards.net/showthread.php?t=20401
Mark it Zero!
Thank you. I read that before posting but I've also read conflicting posts. So I called Don and he told me .034 whereas that sticky says .032-.033
I gap the plugs for my standard Optimax 150 per the FAQ.
_______
Phil
'09 Hewescraft ProV
'09 150 Optimax
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Bob Gottschalk
2019 Z18
2019 PRO XS 175 FOUR STROKE
NEVER rely on pre-gapped plugs and ALWAYS verify gap using a wire style plug gauge before installing in your engine. Your 150 ProXS is different than the OPs standard 150 and differences are addressed in the same link posted above - Oil, Battery, Spark Plugs, Fuel and Fuel Additive Recommendations
_______
Phil
'09 Hewescraft ProV
'09 150 Optimax
+1
Also... Bob- if you would, read through the Announcements at the top of the forum. ONE engine per thread, please (helps prevent confusion and thread hi-jacking).
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor