Results 1 to 10 of 10
  1. #1
    Member
    Join Date
    Jan 2009
    Location
    Wakefield
    Posts
    375

    Minn Kota Fortrex 101 45'' 36v with us2

    Minn Kota Fortrex 101 45'' 36V with US2. Came on my 2014 Skeeter zx20. Boat was put into service this past april. trolling motor is 6 months old and lightly used..$1000.00 Wakefield MA
    Last edited by TeamDaiwa18; 02-22-2017 at 08:42 PM.

  2. Member
    Join Date
    Jan 2009
    Location
    Wakefield
    Posts
    375
    #2
    bump

  3. Member
    Join Date
    Mar 2007
    Location
    Bridgewater
    Posts
    236
    #3
    Did you replace with an ultrex, if so how do you like it

  4. Member
    Join Date
    Jan 2009
    Location
    Wakefield
    Posts
    375
    #4
    I did not going with a 52'' fortrex for another year or two... BUMP

  5. Bullet/Reels4Sale/Rods4Sale Moderator jayfaro's Avatar
    Join Date
    Mar 2007
    Location
    Townsend, MA
    Posts
    3,876
    #5
    If I didn't have to redrill my deck I'd buy this but the slant of the Bullet is too drastic to have 8 more holes drilled.
    Jay Faro
    Bullet 21xdc/300xs

  6. Member
    Join Date
    Jan 2009
    Location
    Wakefield
    Posts
    375
    #6
    what do you have on their now?

  7. Bullet/Reels4Sale/Rods4Sale Moderator jayfaro's Avatar
    Join Date
    Mar 2007
    Location
    Townsend, MA
    Posts
    3,876
    #7
    MG Tour 109. The Bullet top deck has a slight falloff to the bow and the MG and MK mounts don't line up unfortunately. I'm a MK guy stuck with a MG mount.
    Jay Faro
    Bullet 21xdc/300xs

  8. Member xltrod's Avatar
    Join Date
    May 2005
    Location
    Windham NH
    Posts
    4,528
    #8
    Jay Mount a plate to the boat using the MG holes and mount the MK to the plate.
    Xltrod1@comcast.net

  9. Bullet/Reels4Sale/Rods4Sale Moderator jayfaro's Avatar
    Join Date
    Mar 2007
    Location
    Townsend, MA
    Posts
    3,876
    #9
    Rod,
    i wouldnt even know where to start! Do they make a plate standard? I ain't the handiest of people!
    Jay Faro
    Bullet 21xdc/300xs

  10. Member
    Join Date
    Jan 2009
    Location
    Wakefield
    Posts
    375
    #10
    you can just get the plate made anywhere. very simple to do. Put the plate on. mount the new plate to the deck using the MG bolt pattern. then put the new fortrex bracket ontop, mark the holes, drill them out an bolt the bracket on.