Wiring tilt and trim in a 92 bass tracker

[Steele]

Hey guys, any help is appreciated. I have a 92 bass tracker tx17 with a 92 Johnson 40hp motor. I purchased a Cmc pt-130 hydraulic tilt and trim jackplate as my motor doesn't have tilt and trim and this seemed to be the best and cheaper option. My question is, the throttle control on the boat has a tilt and trim button on it, are these wires run all the way back to the motor and hanging out somewhere that I can just tap into. I'd like for it to be as close to factory as possible, but if it's too complicated I'll just wire in a separate switch. Thanks again.

[gatorglenn]

IsThe control box and Evinrude box or a mercury box. If it's a mercury box then it probably does have the wires back there for an old mercury motor that was on there.

[slonezp]

Should be only 2 or 3 wires