2013 PUMA FTD - RECESSED TRAY HOLD ULTREX PEDAL????

[Bellevue Bobber]

Have a 2013 Puma FTD....curious if the tray will hold an Ultrex Foot Pedal?

Thanks.

[IFish4Bass]

This link should help you.

http://www.bbcboards.net/showthread.php?t=747896&page=5

[mike464]

Yes, I put one in my '13, you'll need to drill new holes for the pedal, it sits a little bit forward by maybe an inch from a fortrex

[Bellevue Bobber]

Thanks for the answers IFish and Mike464.

[mossie3]

any pics of an install in a late mode Puma/Cougar?

[mike464]

It looks just like the Fortrex, same mount, foot pedal just a little bigger, but fits fine

[mossie3]

My install is mostly done, but I'm a little bummed out that my rod box won't fully open because it hits the TM head. I used the previous Fortrex mounting holes in a 14 Puma.

edit: The TM wasn't fully down. With it adjusted fully down, I have maybe 2" of clearance to open the rod box!

[catdude28]

Yes, I put one in my '13, you'll need to drill new holes for the pedal, it sits a little bit forward by maybe an inch from a fortrex

I wanted to raise the pedal a little to make access to the back buttons easier. I used a piece of Sanalite plastic and made a template using the old holes. That way I did not have to drill any more holes in the boat either. Then I just screwed the pedal to the Sanalite.

[mike464]

Good thinking!

[Bass Cat Boats]

Yes it will fit. Same well on a 2017.