202 trailer help

[taly-ho]

Hey guys does anyone have a 99 202 on a tandem trailer? If so would there be anyway I could get some information from you. I'm in the process off putting my axles on and would like a close up pic of the rear area of the fender. I know by looking at some pic the step part where the tail light is and wraps around where it 45 degrees towards the back. I would very much appreciate it. Thanks Evan

[shimanostud]

I have a 97 with tandem but I'm unsure if they changed anything between those years, it's out to my shop I could get measurements Sunday if you need them still.

[pmgoffjr]

Only reasonable picture of a 202 trailer I've got, hope this is what you were looking for.

[bruce']

I remember that rig. ^^^^^^^^^^^^^^^^

[pmgoffjr]

It was a bad dog indeed.
XB with 225 decals.
klegecel build weighed around 900 lbs. solid 84 mph runner ready to fish. Annoyed any skeet or toon that wanted to throw down.

The best tournament boat out of all the great boats I had the privilege to run.

[1bluemcm]

Any idea whatever came of it? Still out there running I would hope.

[taly-ho]

Thanks Pat! One more question to anyone. How long are your fenders and what's you center line on your axles? Right now I've got mine set at 33". There just clamp on at the moment. Thanks Evan

[taly-ho]

[pmgoffjr]

Last time I heard its living at falcon lake.

[grout-scout]

Last time I heard its living at falcon lake.

Now that's a lake I wouldn't want to run 80 across when the wind was blowing.

[pmgoffjr]

Falcon can get really nasty with a NW wind.

Sorry I have no ideas on dimension or measurement.

[allisonxtb]

My registration card says 1997 20'2" will that work?

[95202DCX]

Thanks Pat! One more question to anyone. How long are your fenders and what's you center line on your axles? Right now I've got mine set at 33". There just clamp on at the moment. Thanks Evan

34.5" Axle center to center...Fenders are 65" My trailer is a 95.