Anyone ever do this with an HDI unit? If so how did it perform? The instructions say it can't be shot through wood......wasn't sure if there's wood in the pad area or not of the Bullet?
i have a lil Elite 5 HDI I'm wanting to install under the windshield, but not fond of drilling another hole in the splashwell or transome to mount it. And no, I can't squeeze it through the rigging with the 1" plug in, so I'm thinking of pulling the tank amd mounting it in the bilge area.
Thoughts? Opinions
It worked on my 21ss. There's a spot under the tank they have just to mount them
There is a place under the tank that is just fiberglass for that.
My 21RDC has one too, I mounted a transducer in it
Excellent, thanks fellas. I've taken the tank out before to replace the bilge, so it's not a big deal. Does the down scan still work decent?
Down scan needs to be on bottom of jack plate.
Puck transducer works great thru the hull, structure scan needs to be on the skid plate on the bottom of the jack plate, send me your number, I'll send you a pic
My puck has popped loose from the epoxy. I have avoided removing my tank to re-install it. But mine is just for a Lowrance flasher. It was great for real time depth on plane. I miss it but I don't want to pull that tank to repair.
There is no wood in hull area . There's not very much balsa in the boat just a few places. I could be wrong I hope not
Pulling the tank is a 10-15 min deal...faster on a 21.Originally Posted by KHNC
BULLET 20 XRD/250 Merc Sport XS
www.ncboatguy.com
May give it a shot. Gonna run out some gas.
2022 Blazer 675 Ultimate
2022 Merc 300 Pro XS
2017 YZ250F
Kenny Hollingsworth<<<<<<<<<MY NAME!
828 674 6752
Hendersonville NC<<<<MY LOCATION!!
I'm pullin one on a 21 in the morning....
BULLET 20 XRD/250 Merc Sport XS
www.ncboatguy.com
Don't know about the SS but the 21xd pulls out better than any tank I've messed with. 10 min and you're done.
2008 BULLET 21XD 2007 Merc 300xs
Reply With Quote