Trim gauge

[NailerB]

Just swapped out a 89 Evinrude for a 2004 model. The gauge was never correct on the old motor and doesn't seem to work at all now. Possibly wired wrong for new rig?

Thanks
Nailer

[ChampioNman]

Did you use the MWS wiring for the new motor or use a conversion cable for the big red plug? For the trim gauge your sender wire is white with tan tracer, ground black and blue for back light.

[NailerB]

I installed the complete harness that came with motor, I believe it came off a 04 Stratosphere. Was simply plug and play at motor. I also got the system check tach with the deal. There are two oddball plugs(one is labeled Stratosphere) that I did not use. I suspect the trim leads are in one.

[ChampioNman]

Probably came off of a Stratos. Don't matter you need to look at the harness at//near the control box. There should be a couple three wire harnesses with ring terminals on them. It should branch off the system check loom.