Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Mar 2007
    Location
    Il
    Posts
    992

    steering wheel center cap

    Did anybody ever find who made these?
    Ive looked for quite some time now.
    thanks
    "No man stands taller than one who stoops to help a child"

  2. Member
    Join Date
    Mar 2015
    Location
    Bixby, OK
    Posts
    2,285
    #2
    I'd like to have one too. Doubt there are any floating around anywhere, but you never know.

  3. Member Tx 201's Avatar
    Join Date
    Aug 2004
    Location
    Abilene, Texas
    Posts
    3,008
    #3
    I was able to get another one before the company shut down a second time. Cap is held in place by pretty cheap plastic prongs, I lost my orginal cap going down the highway. Whatever cap you find to replace it with, wrap duct tape around the edge of the cap where it goes into your steering wheel for a snug fit. That way if you happen to find a Cobra cap, you won't lose it again. Guessing you will end up with an aftermarket cap that says GT or something similar.

  4. Member
    Join Date
    Mar 2015
    Location
    Bixby, OK
    Posts
    2,285
    #4
    I actually stuck one of the plugs I took out of my dash in there. I took it out of the dash to install a water pressure gauge and it just happened to fit the hole in the steering wheel.