Results 1 to 5 of 5
  1. #1
    Member Meadows's Avatar
    Join Date
    Nov 2011
    Location
    Stuarts Draft, VA
    Posts
    5,342

    Power Poles on a Triton

    I just bought a pair of used 10' blades and I'm planning on mounting them on my 2012 Triton 19SE this weekend. I'd rather not drill holes to run the hoses. Has anyone had any luck running both sets of hoses through the main power hose coming from the motor on this style Triton?

    My main concern is that the main power hose goes into the transom on the right side. How will this affect the hoses from my left power pole?
    2022 Skeeter ZXR20
    Yamaha 250 SHO

  2. BBC SPONSOR/ Shallow Water Anchors Moderator
    Join Date
    Apr 2015
    Location
    New York
    Posts
    10,916
    #2
    It is always best to try to keep the tubing the same length if possible however not necessary. If you find a noticible difference in them when deploying and stowing you can adjust the speed of them individually in the app so they are in sync.

  3. Member Meadows's Avatar
    Join Date
    Nov 2011
    Location
    Stuarts Draft, VA
    Posts
    5,342
    #3
    I was afraid someone was gonna say that! Lol

    Thanks for the info. I'm probably just gonna drill a couple holes
    2022 Skeeter ZXR20
    Yamaha 250 SHO

  4. BBC SPONSOR/ Shallow Water Anchors Moderator
    Join Date
    Apr 2015
    Location
    New York
    Posts
    10,916
    #4

  5. Member
    Join Date
    Feb 2014
    Location
    Lockport,N.Y.
    Posts
    6
    #5
    I have the same boat and motor,how many inches from floor to top of 10' blade? Also are your mounts up or down in the slots in the jack plate? I have the mounts but want to make sure it will clear the door. I know I can drop them a little but don't want to ever forget and have to replace a door! Thanks in advance! Bill R.