Does anyone have a 7" screen flush mounted in the dash? Something like a lowrance elite 7 or hook 7? Dimensions on both 9.25x6". Of course the tach would have to be relocated. I'm away from my boat for the next few days and can't take measurements.
Does anyone have a 7" screen flush mounted in the dash? Something like a lowrance elite 7 or hook 7? Dimensions on both 9.25x6". Of course the tach would have to be relocated. I'm away from my boat for the next few days and can't take measurements.
You would have to move the tach and speedo or build a mount like I did for mine for an HDS7
"Luminous beings are we not this crude matter." Yoda
Dean and I have the Lowrance 7hds flush mounted.
The tach and mercmonitor will have to be on bottom as I'm pretty sure they won't fit on side of gps
No But Dean may
Hi pickwick,
I am am currently upgrading my electronics. If you plan to keep the speedo and tach the max mine will take is a 7" wide unit. I have chose to install a new HDS 5 Gen 1 that I already have and put a HDS 9 Gen 3 with 3D scan on the bow. If you connect them you can still see the structure scan on the HDS5 just not the 3D view. You can also connect an iPad to the HDS 9 via WiFi and watch and control the unit from the driver seat. Hope that helps.
Stacy
2009 Stroker 300XS
2009 Stroker 300XS
I think it could be done Mathew. It would set on a slight angle as it would need to be down close or a little past the little hump. I think it could be done though.
Mine is set like up like Gary's it works great
"Luminous beings are we not this crude matter." Yoda
I have a 998 set up like Gary's.
Hope this works.
Mine is also similar to Gary's, with a 7" GPS finder. Don't know how to post photos, but shoot me an email and I can sent pic. Or maybe you can remember from the rally. I removed the useless speedo and inserted a merc monitor in the same hole.
Matt that's a 7 HDS Gen 3.