Can anyone tell me a way to mount a Hook 7 on my Nitro NX 898 console. The existing space is too small. I have checked with Precision Sonar and no kit is available. Thanks!
Can anyone tell me a way to mount a Hook 7 on my Nitro NX 898 console. The existing space is too small. I have checked with Precision Sonar and no kit is available. Thanks!
Not sure the config of your console but i made my own for a Onix 10 on my 2009 Z7
You did a great job! Your console is similar to mine. On my console, there is only 7" of space between the upper two gauges (tach&speedo) and the base of the Hook 7 is 9" wide. Did you have to disassemble the console to reinforce the back of it to support your unit? Any details would be appreciated. Thanks you for your prompt reply!
I did not disassemble anything other than the deep bezels on the top two gauges. I only had 6 1/4" flat space to work with. Just to play it safe i ran stainless steel bolts and used a piece of the HDPE material as a backing plate with lock nut and flat washers.Through bolted the mount through the back plate also.
Thanks again. Very nice. I will start on mine soon.