Thread: Bullet21SS

Page 1 of 3 123 LastLast
Results 1 to 20 of 46
  1. #1
    trapp201pro
    Join Date
    Apr 2012
    Location
    northwest alabama
    Posts
    1,439

    Bullet21SS

    Lets put your #s and your motor out and see who is second fastest,because Aaron set the bar a little high for mere mortals.NO BU$HIT if you post it you need to be able to back it up.Mine is 102 with a merc 300D BR 1.3,Nass Cowl at 2 3/8 above pad with a 32 Performer that has had a little work on it(I dont know) I had a little bit more I didnt push it,Im good with those for know.I also have a 14" rapid jack,I think most all others have a 12"
    Last edited by trapp201pro; 01-11-2017 at 03:31 PM.

  2.  
  3. trapp201pro
    Join Date
    Apr 2012
    Location
    northwest alabama
    Posts
    1,439
    #2
    Where is the guy that kept on telling me I could get out of the 90s if I just had 1.62 gears and dump the 1.75s

  4. Member
    Join Date
    May 2012
    Location
    Lake Gaston
    Posts
    363
    #3
    I've got an XRS that does 103

  5. Member
    Join Date
    Nov 2010
    Location
    Humble,TX
    Posts
    4,447
    #4
    Quote Originally Posted by Huckleberry View Post
    I've got an XRS that does 103
    What mods are done to your power stroke and what rating trailer tires are you running??!??

  6. Member
    Join Date
    Oct 2006
    Location
    Metropolis, IL
    Posts
    4,606
    #5
    Quote Originally Posted by 90 5.0 View Post
    What mods are done to your power stroke and what rating trailer tires are you running??!??


    2012 Kevlar 21ss
    2013 Merc 250 Sport XS w/ 1.62 SM
    29 Hydromotive X-O/B built for a 20xrd Comp/300xs.

    94 solo, loaded to fish, full fuel, empty livewell.


    2012 Kevlar 21ss
    2014 250 Sport XS w/ 1.75 SM
    30 Pro Finish Promax

    Its been 88 loaded with 2, full fuel, empty livewell.


    Hasn't been ran since June 2015, never did get a chance to finish setting it up and dialed in since swapping motors. The new engine has 24-26 hours on it.


    Ive got a 34 P4 that should turn out some good light numbers.
    Last edited by Tim Powell; 01-12-2017 at 10:35 AM.
    2013 Allison XB-21 BasSport Pro
    2013 Mercury 3.2 Stroker by DBR

    2012 Bullet 21ss
    2014 Mercury 250 Sport XS

  7. Member crank68's Avatar
    Join Date
    Mar 2011
    Location
    Kenly, NC
    Posts
    12,773
    #6

    Bullet 20 XRD/250 MercSport XS

  8. Member
    Join Date
    Nov 2010
    Location
    Humble,TX
    Posts
    4,447
    #7
    Quote Originally Posted by Tim Powell View Post


    2012 Kevlar 21ss
    2013 Merc 250 Sport XS w/ 1.62 SM
    29 Hydromotive X-O/B built for a 20xrd Comp/300xs.

    94 solo, loaded to fish, full fuel, empty livewell.


    2012 Kevlar 21ss
    2015 250 Sport XS w/ 1.75 SM
    30 Pro Finish Promax

    Its been 88 loaded with 2, full fuel, empty livewell.


    Hasn't been ran since June 2015, never did get a chance to finish setting it up and dialed in since swapping motors. The new engine has 24-26 hours on it.


    Ive got a 34 P4 that should turn out some good light numbers.
    Didnt yall used to have a 300 on it originally or did you just get newer 250's everytime yall switched motors?

  9. Member
    Join Date
    Oct 2006
    Location
    Metropolis, IL
    Posts
    4,606
    #8
    Never had a 300 on this one, he always fished BFL and Everstarts out of it so its had 3 different 250 Sport XS engines on it.

    We had a 21xdc and a 20xrd Comp with 300xs.
    2013 Allison XB-21 BasSport Pro
    2013 Mercury 3.2 Stroker by DBR

    2012 Bullet 21ss
    2014 Mercury 250 Sport XS

  10. trapp201pro
    Join Date
    Apr 2012
    Location
    northwest alabama
    Posts
    1,439
    #9
    Tim I would like to run that 34,is it the 1 that Aaron had ?

  11. trapp201pro
    Join Date
    Apr 2012
    Location
    northwest alabama
    Posts
    1,439
    #10
    deleted
    Last edited by trapp201pro; 01-14-2017 at 09:19 AM.

  12. Member
    Join Date
    Oct 2006
    Location
    Metropolis, IL
    Posts
    4,606
    #11
    Quote Originally Posted by trapp201pro View Post
    Tim I would like to run that 34,is it the 1 that Aaron had ?
    Yes, I got it from Aron.

    I call it a 34 FC P4....Frankenstein Cut! Its got a little bit of everything done to it

    I believe Aron told me it ran 104 on his boat in bad conditions with DBR 300xs
    2013 Allison XB-21 BasSport Pro
    2013 Mercury 3.2 Stroker by DBR

    2012 Bullet 21ss
    2014 Mercury 250 Sport XS

  13. Member
    Join Date
    Mar 2013
    Location
    Georgia
    Posts
    1,159
    #12
    I'm up to 87mph, buying a used lower this week to get coned by hydrotech then Ecu reprogrammed. I might get close to 100mph. But I'd be happy with 96mph.

    or I might see if hydrotech wants to trade me the one they have for sale. It's a 250hdpi with phase 3 kit with sporty.

  14. SEE YA!!!!!!!! DLAB's Avatar
    Join Date
    Jan 2010
    Location
    Pineville, LUZIANNA
    Posts
    9,801
    #13
    ThunderCat know some one selling a worked SHO case Bradley......its just the case though, no gears

  15. Banned
    Join Date
    Jan 2017
    Location
    NC
    Posts
    38
    #14
    Quote Originally Posted by trapp201pro View Post
    Where is the guy that kept on telling me I could get out of the 90s if I just had 1.62 gears and dump the 1.75s
    I think he's out running in the teens.

  16. Member 70 Mach 1's Avatar
    Join Date
    Nov 2008
    Location
    Gilmer, Tx
    Posts
    943
    #15
    I ran 100 in Hubert's 100% bone stock 21SS/300XS with the same prop trapp ran on his boat.

  17. Member
    Join Date
    Mar 2013
    Location
    Georgia
    Posts
    1,159
    #16
    Quote Originally Posted by DLAB View Post
    ThunderCat know some one selling a worked SHO case Bradley......its just the case though, no gears
    How much he want for it. Ive got a FLW pro trying to sell me his for 2k. But I think he hit something with it that's why he has two lol

  18. Member
    Join Date
    Mar 2013
    Location
    Georgia
    Posts
    1,159
    #17
    I think we are finally starting to see the full potential of the 21SS. 3 that I know of running over 100. I bet Tim gets close to 100 with the 250. I don't feel like the boat gets the respect that it deserves! I wonder how many were built? I don't see them making any more 21SS ,boats but who knows. I know mine will run 90mph with a stock SHO just the way it is 1/2 under the pad. Just need the right prop. I'm buying a 29 xl razor tomorrow. I know it's not the one to get to 90mph. But a good fishing prop. Who knows maybe it will run with my combo.

    Trapp you fish Pickwick Lakę right? I don't think your to far from me. Guntersvile only 1:45 from me.

  19. Member
    Join Date
    Aug 2016
    Location
    Colbert co. Alabama
    Posts
    452
    #18
    Two plus hours Guntersvlle to Pickwick.

  20. Member
    Join Date
    May 2012
    Location
    Florida
    Posts
    1,439
    #19
    Quote Originally Posted by Bradley21SS View Post
    I'm up to 87mph, buying a used lower this week to get coned by hydrotech then Ecu reprogrammed. I might get close to 100mph. But I'd be happy with 96mph.

    or I might see if hydrotech wants to trade me the one they have for sale. It's a 250hdpi with phase 3 kit with sporty.
    I would not do that. I would buy a sporty before you put money into the Yamaha case
    2003 Stroker with 2014 SHO
    2012 21RDC Bullet with 2016 SHO

  21. Member
    Join Date
    Mar 2012
    Location
    Leesburg
    Posts
    343
    #20
    Getting both of my 32s worked on. Tim said the Pro Et dropped the nose and Jerry said the Preformer dropped the nose also. Can not let
    that happen. Matt has a prop off the 400R that's on the Stroker trying to make it run. All Matt would do is say something about the prop
    and shake his head.

    I have a 21XRD with a 300XS, DBR 1.3 kit 1.62 or 1.75 Sport Master, depends on what I am going to do. Lightly loaded, cool air can run
    with most but all of the cookie cutters out there.

Page 1 of 3 123 LastLast