anyone have any information on getting the hard left lean out of these hulls.
anyone have any information on getting the hard left lean out of these hulls.
Move heavy stuff to the starboard side.
I have had the same problem with mine, I moved stuff around and used the trim tab, to counter act the left lean.
I have also raised the motor which made a difference as well. I'm not sure what happened but if your motor is mounted
like mine it has a slight tilt to the right looking back at it.
Hope this helps .................. PJ
Hold-em tight and give-em lotsa slack !!!
Turn a little too the right on your launch. Is the only thing I've figured out.