My portside pump ets stuck and needs a push to go down. Same with up. I posted a video. Hopefully it works
My portside pump ets stuck and needs a push to go down. Same with up. I posted a video. Hopefully it works
Last edited by Tim W; 01-09-2017 at 07:18 PM.
I will. I also sent pp a message. It just started doing it today.
I will thank you sir.
Come to find out my bushings are bad which caused me to have a lot of play. When I tightened the bottom two bolts I guess I over tightened them. Per power pole the bolt should sit flush with the nut. They recommend changing every 100 cycles
To make a long story short they are sending me 2 new bushing kits. Now that's service.
The rebuild kit worked like a charm. Surprisingly all those little pieces were easy to put it. Took about 45 mins per pole.