Results 1 to 11 of 11
  1. #1
    Member
    Join Date
    Feb 2009
    Location
    Palestine, TX
    Posts
    14

    Best place to get replacement trailer lights? LED?

    I plan on replacing my trailer bunks soon and decided I want to rewire my trailer and change out the lights to LED on my 2005 triton boat trailer. I've done some searching locally, but curious where you have bought from before and had good luck. I will be replacing all trailer lights to LED including the Triton Boats cut out on the side. I'm a novice at this kind of stuff so any advice is appreciated. I recently moved my boat into a shop on my property. And for the first time, feel like I have time, room, and space to work on a few things. Thanks Coach

  2.  
  3. Member
    Join Date
    Mar 2013
    Location
    DE
    Posts
    16
    #2
    I have a 05 as well and just swapped mine out for led. I got them all from Eastern Marine trailer parts they all plugged right in.

  4. Member SoonerFan's Avatar
    Join Date
    Apr 2007
    Location
    Edmond, Oklahoma
    Posts
    8,871
    #3
    I think they're all pretty standard...oval or rectangular light with a 3 pin plug in. 15 minutes

    I used Optronics that I got at either Academy or BPS.
    Don't worry Ma'am....
    I'm only here for the
    Bass.

  5. Member
    Join Date
    Feb 2009
    Location
    Palestine, TX
    Posts
    14
    #4
    Thanks guys

  6. Member XpressJeff's Avatar
    Join Date
    Dec 2016
    Location
    Sophia, NC
    Posts
    16
    #5
    Tractor Supply has a good selection of trailer supplies of all types.
    Old Retarded Jarhead
    Master Sergeant of Marines (Retired)

  7. Member
    Join Date
    Jan 2007
    Location
    Kansas City, KS
    Posts
    920
    #6
    Most farm supply stores have good selection of trailer parts
    Joefish
    2000 Javelin 115 Johnson
    <*)}}}}><

  8. Member
    Join Date
    Apr 2014
    Location
    Iowa
    Posts
    78
    #7
    I've replaced the wiring and lights on two boat trailers now, and used optronics LEDs, ordered from etrailer.com. Most running light mounts are standard so you should be able to pop out the old bulb lights and put LEDs in. I wouldn't replace the mounts unless they are broke or aren't making a good ground connection.

    The two recommendations I would give you is to use dielectric grease on plugin connections, and use marine grade heat shrink tubing over wire connections. If you are redoing the wiring, soldering is the best, but I have't have a problem with butt connectors.

  9. Member
    Join Date
    Apr 2016
    Location
    Hartland,Wi
    Posts
    37
    #8
    I bought all my lights, bearings and seals through etrailer.com They have good videos of the products showing light out put and what not. They offer free shipping and their customer service is great.
    2003 Skeeter ZX200

  10. Member
    Join Date
    Apr 2012
    Location
    Seaford (lower slower) Delaware
    Posts
    15,758
    #9
    Quote Originally Posted by awmcdonald View Post
    ............The two recommendations I would give you is to use dielectric grease on plugin connections, and use marine grade heat shrink tubing over wire connections. If you are redoing the wiring, soldering is the best, but I have't have a problem with butt connectors.
    If you haven't tried Liquid Electrical Tape I suggest you try it. Paint it over the splice or solder joint, slide heat shrink over it and heat. It coats the repair and forces the liquid out of the heat shrink ends to form a hermetically sealed area that won't trap water inside.

  11. Member
    Join Date
    Feb 2016
    Location
    Roanoke va
    Posts
    171
    #10
    i got mine off ebay
    2004 Ranger 521vx Yamaha 250 SHO


  12. Member
    Join Date
    Mar 2008
    Location
    Nashville
    Posts
    30
    #11
    I have a Ranger Trail, 2000, single axle, with original light fixtures. Anybody swapped out LED's on one of these? Where did you get them?

    Thanks