I bought a used 52" fortrex 112 off the boards for my 07 Stratos 201. It had a Maxxum pro 101 on it before. My problem is, I didn't realize the mount for the fortrex was so much longer. It's around 9" longer at the base than my old one was. It wouldn't be a problem but my boat has the raised panel all the way around the bow where the switches and front graph are located. So the end of the mount sticks out around 8-9" from the front of my boat which looks kinda dumb. Has anybody else done this and is there anything I can do to tuck it in further, or do I need to just live with it? I will not trim that panel on the boat. Thanks in advance.