Guys I'm running a 250 pro xs and want to know your pvs configuration for a tempest.
Guys I'm running a 250 pro xs and want to know your pvs configuration for a tempest.
2004 Stratos 201 Pro XL
2016 Mercury 250 Pro XS 25 fury 77mph
hds12c hds12c hds9
Ghost, blades
I runs minds with all the plugs out .But i have a 2.5 200 HP also .Which want help you very much .
Mine has quite a bit more torque and lower is different.
2004 Stratos 201 Pro XL
2016 Mercury 250 Pro XS 25 fury 77mph
hds12c hds12c hds9
Ghost, blades
2 of the 3 or out on mine.
Stratos1 what pitch are you running? Also which gearcase?
2004 Stratos 201 Pro XL
2016 Mercury 250 Pro XS 25 fury 77mph
hds12c hds12c hds9
Ghost, blades
26 Tempest Plus with a little work done to it nothing to fancy. Not sure what gear case I have. Motor is 2 3/4 below the pad.
Once you account for poles that's similar to my 27. What's your holeshot rpms and top end?
2004 Stratos 201 Pro XL
2016 Mercury 250 Pro XS 25 fury 77mph
hds12c hds12c hds9
Ghost, blades
Not sure on the holeshot numbers comes out the hole good, summertime with livewells full it can be a little sluggish but not bad. I'm talking when it's 90 to 100 degrees. Top end 70 to 72 mph 5600 to 5700 rpm's
I run a 28 sl4 to 74 but it needs tip cup I'm seeing 16.5% slip should see 79 at 5900 I'm surprised you aren't seeing more speed.
2004 Stratos 201 Pro XL
2016 Mercury 250 Pro XS 25 fury 77mph
hds12c hds12c hds9
Ghost, blades
I'm sending it to mark he's gonna put a little tip cup to eliminate blowing out with holes open.
2004 Stratos 201 Pro XL
2016 Mercury 250 Pro XS 25 fury 77mph
hds12c hds12c hds9
Ghost, blades