Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Aug 2015
    Location
    Greenville, Alabama
    Posts
    25

    trailer tongue steps

    Trying to get in contact with the company that makes the "boat board" step system. Anyone know how I can get in touch with them?
    I have sent several emails to the address on the web sight but no answer. Thanks.

  2.  
  3. Member ifishinxs's Avatar
    Join Date
    Jul 2015
    Location
    Southern Utah
    Posts
    1,179
    #2
    Just make one..this one holds my 225lbs easy with both feet on it.. I could add pole to hold onto if needed.
    Attached Images Attached Images
    2010 Skeeter ZX 200 200 HPDI
    Garmin EchoMap 93's/CV52/GT52/PS22
    My name is Bob and I fish way to much.

  4. Member 1BADAIR's Avatar
    Join Date
    Dec 2014
    Location
    OXFORD MI
    Posts
    1,404
    #3
    If you can't reach them I recommend Trick Step
    2011 Ranger z521/250HO

  5. Member
    Join Date
    Nov 2011
    Location
    Pinnacle, NC
    Posts
    1,567
    #4
    What boat do you have? Many have the front eye set in different places, some are hard to reach when onboard and some aren't when trying to hook up the winch strap. This was the deciding factor when I bought my Easy Step system. I fish a lot by myself and sure makes getting in and out of the boat easy. I have a 98 TR20 which sets high off the trailer in the front and the winch eye sets back enough that I can't reach it when on board.
    Rocket

  6. Member KutTail71's Avatar
    Join Date
    Apr 2012
    Location
    Pasadena,TX
    Posts
    1,898
    #5
    Quote Originally Posted by ifishinxs View Post
    Just make one..this one holds my 225lbs easy with both feet on it.. I could add pole to hold onto if needed.
    Would you happen to have a material list? Would like to something similar.
    Eddie
    97 Stratos 201 Pro Elite Evinrude 225 Vindicator

  7. Member
    Join Date
    Jul 2007
    Location
    danville,indiana
    Posts
    6,213
    #6
    Quote Originally Posted by gdaddy View Post
    Trying to get in contact with the company that makes the "boat board" step system. Anyone know how I can get in touch with them?
    I have sent several emails to the address on the web sight but no answer. Thanks.
    same here,i thought they was a board sponsor at one time

  8. Member Bill Reynolds's Avatar
    Join Date
    Aug 2013
    Location
    Hot Springs Arkansas
    Posts
    1,255
    #7
    I did not like the Ranger Steps because they stick out too much on the side. I get into some really tight spots and was afraid the step may hit the back of the truck. I had these built and I made the grab bar out of 3/4 inch pipe. The grab bar does not have much of a finished look but it sure works well. The top step bolts under the winch and the lower step bolts to the jack stand so there is no welding or drilling and the install time is about 15 minutes. I too fish a lot alone and these steps are perfect loading and unloading.
    Attached Images Attached Images

    Southern By Latitude - Gentleman By Attitude

  9. Member
    Join Date
    Aug 2015
    Location
    Greenville, Alabama
    Posts
    25
    #8
    Thanks to all who responded.

Tags for this Thread