Thread: 2004 ZX225

Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    May 2008
    Location
    Ardmore, Oklahoma
    Posts
    46

    2004 ZX225

    I am looking at a clean used Skeeter, anything I need to look at with this model? Thanks for your help in advance

  2. Member PaulGifto's Avatar
    Join Date
    Jan 2008
    Location
    Brampton, Ontario, Canada
    Posts
    663
    #2
    The well documented touch panel. Has it been changed? Get the motor checked by a mechanic pay for a compression test leak test LU if it all good you will love the boat.
    Paul Gifto
    2013 Nitro Z9 2021 250hp Mercury ProXS
    Ontario Canada 🇨🇦

  3. Member
    Join Date
    May 2008
    Location
    Ardmore, Oklahoma
    Posts
    46
    #3
    It has had the touch panel switched over to rockers. Thanks for the input.

  4. Member
    Join Date
    Oct 2016
    Location
    DeWitt, IA
    Posts
    352
    #4
    Check if cap and hull are still screwed together securely. These boats where prown to having screws back out then shear off. Not a deal breaker but may require a little work to correct. Bang on the cap with your fist near the edge and listen for any excessive vibration type noise.

  5. Member
    Join Date
    May 2008
    Location
    Ardmore, Oklahoma
    Posts
    46
    #5
    Well, I am the proud owner of a new (to me) ZX225 skeeter. I noticed that in the tackle box area that most of the dividers for plano style boxes are missing. Any chance someone could point me in the right direction of where to buy these

  6. Member
    Join Date
    Feb 2015
    Location
    Columbia SC
    Posts
    2,270
    #6
    Quote Originally Posted by topconmm View Post
    Well, I am the proud owner of a new (to me) ZX225 skeeter. I noticed that in the tackle box area that most of the dividers for plano style boxes are missing. Any chance someone could point me in the right direction of where to buy these
    Dealer, but people use those paper organizer in/out things. Much cheaper.

  7. Member
    Join Date
    May 2008
    Location
    Ardmore, Oklahoma
    Posts
    46
    #7
    Ok, thanks. But I guess I do not know what those are. I will check into it