Results 1 to 4 of 4
  1. #1
    Electrical/Wiring/Trolling Motors Moderator Jonestrollingmotor's Avatar
    Join Date
    Jan 2005
    Location
    Texarkana
    Posts
    20,210

    Ultrex foot pedal dimensions

    Several have stated the foot pedal doesn't fit the recess. The recesses with the rounded back doesn't allow for the total length. I've installed them in Basscat's and Rangers without a problem, although the length on the Sabre interfered with the plug and had to put a disconnect at the batteries (as it should have) and leave the plug in. Below is the diagram that I posted earlier showing the dimensions. Please refer to this if if doubt before you order your new Ultrex.
    John
    Attached Images Attached Images
    BBC Sponsor http://www.jonestrollingmotor.com (870) 773-3474
    Mon - Thrs 8am - 5pm Friday 8am -12pm Central time
    Talon Specials: Call for quote and availability

  2.  
  3. Electrical/Wiring/Trolling Motors Moderator Jonestrollingmotor's Avatar
    Join Date
    Jan 2005
    Location
    Texarkana
    Posts
    20,210
    #2
    Quote Originally Posted by Jonestrollingmotor View Post
    Several have stated the foot pedal doesn't fit the recess. The recesses with the rounded back doesn't allow for the total length. I've installed them in Basscat's and Rangers without a problem, although the length on the Sabre interfered with the plug and had to put a disconnect at the batteries (as it should have) and leave the plug in. Below is the diagram that I posted earlier showing the dimensions. Please refer to this if if doubt before you order your new Ultrex.
    John
    The dimensions are hard to read here, but copy/paste the thumbnail to paint, then you can enlarge the picture. The original pdf is too large to post here.
    BBC Sponsor http://www.jonestrollingmotor.com (870) 773-3474
    Mon - Thrs 8am - 5pm Friday 8am -12pm Central time
    Talon Specials: Call for quote and availability

  4. Electrical/Wiring/Trolling Motors Moderator Jonestrollingmotor's Avatar
    Join Date
    Jan 2005
    Location
    Texarkana
    Posts
    20,210
    #3
    Here is another video made back in August of the Ultrex. Reason I'm posting, it shows the 360 connected to the bowguard. Some have asked about the bracket. I'm in the process of finding out of the bracket will be available or if you're going to have to purchase the Ultrex 360 when it is released. I'll keep you posted.
    John
    https://www.facebook.com/jc.proangle...5136199737527/
    BBC Sponsor http://www.jonestrollingmotor.com (870) 773-3474
    Mon - Thrs 8am - 5pm Friday 8am -12pm Central time
    Talon Specials: Call for quote and availability

  5. Electrical/Wiring/Trolling Motors Moderator Jonestrollingmotor's Avatar
    Join Date
    Jan 2005
    Location
    Texarkana
    Posts
    20,210
    #4
    Regarding the 360 mount. Just got back in touch with MinnKota. It is his understanding that the current 360 will not work with the Ultrex and they (Humminbird) are saying you will have to go to the Ultrex 360, and looking at a March timeframe on it. They didn't say, but reading into this doesn't look like Humminbird is intending to build a separate bracket only for the Ultrex. We won't know til it comes out if you can purchase the bracket as a "part" (like you can purchase trasducers, cables, etc.) and then if it will retrofit to the 360 that is in use now.
    John
    BBC Sponsor http://www.jonestrollingmotor.com (870) 773-3474
    Mon - Thrs 8am - 5pm Friday 8am -12pm Central time
    Talon Specials: Call for quote and availability