Thanks for the measurements
Thanks for the measurements
what's the height of the pedal from the top of the Spot-lock button to the bottom of the rubber feet?
I've got a ranger Z20 with the glassed in recess and I was curious if it was going to be shallow enough that I could mash Spot-lock without having to point my toe at it.
8eDGl80.jpg
This is what I got.
Last edited by BassCPT; 04-01-2019 at 08:25 PM.
united in the pursuit of bass.
I've made that install before and the spot lock button is just under the rim of the recess. The pedal is close on going in, but the recess is wider under the trim ring.
John
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]
I don't suppose that Motor Guide and Minn Kota would have the same measurements for mounting? I'm replacing my old m/g tour 82 with an Ultrex.
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]