Results 1 to 16 of 16
  1. #1
    Member
    Join Date
    Jun 2015
    Location
    Abingdon, MD
    Posts
    339

    Oznium lens or lensless bolts???

    I’m looking to use LED bolts to light my deck. Oznium has bolts that have a lens, and one without. I’m thinking on the lensless bolt since it floods light more, but not sure if these will throw light out to the middle. My goal is to cast light on the entire deck or at least as much as possible.

    2000 Bass Cat Pantera Classic
    Mercury 200 EFI (0G374590)
    26P Trophy Plus / Garmin Force / Garmin EchoMAP / Dual Power Pole Pro Series II

    "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety."

    - Benjamin Franklin

  2. Member
    Join Date
    Oct 2008
    Location
    Campbellsville, KY
    Posts
    4,367
    #2
    Go over to the Phoenix board, we had a big discussion about them and there are a lot of pictures where guys have used the bolts. Theyre what i will be using in my next boat
    They aint got hands, set the hook

  3. BBC SPONSOR / PHOENIX MOD DREWTICK's Avatar
    Join Date
    Mar 2014
    Location
    Vass, NC
    Posts
    7,827
    #3
    Attached Images Attached Images
    Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
    910-722-0001 call or text
    info@drewcraft.com

  4. BBC SPONSOR / PHOENIX MOD DREWTICK's Avatar
    Join Date
    Mar 2014
    Location
    Vass, NC
    Posts
    7,827
    #4
    no lens cast more light and lens is like a spot
    Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
    910-722-0001 call or text
    info@drewcraft.com

  5. BBC SPONSOR / PHOENIX MOD DREWTICK's Avatar
    Join Date
    Mar 2014
    Location
    Vass, NC
    Posts
    7,827
    #5
    here they are not dimmed
    Attached Images Attached Images
    Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
    910-722-0001 call or text
    info@drewcraft.com

  6. Member
    Join Date
    Oct 2008
    Location
    Campbellsville, KY
    Posts
    4,367
    #6
    Just curious Drew, how in the piss did you get to tge wires on the very front. You wouldve had to go through your bow shroud woukdnt ya. No way to get that far forward from the rod locker is there
    They aint got hands, set the hook

  7. BBC SPONSOR / PHOENIX MOD DREWTICK's Avatar
    Join Date
    Mar 2014
    Location
    Vass, NC
    Posts
    7,827
    #7
    yep through the bow, those were easy, now these were fun
    Attached Images Attached Images
    Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
    910-722-0001 call or text
    info@drewcraft.com

  8. Member
    Join Date
    Oct 2008
    Location
    Campbellsville, KY
    Posts
    4,367
    #8
    I guarantee ya the one beside the seat was fun. Can you take the storage boxes out of the back in a phoenix to get to those wires
    They aint got hands, set the hook

  9. BBC SPONSOR / PHOENIX MOD DREWTICK's Avatar
    Join Date
    Mar 2014
    Location
    Vass, NC
    Posts
    7,827
    #9
    Quote Originally Posted by Fishin is life View Post
    I guarantee ya the one beside the seat was fun. Can you take the storage boxes out of the back in a phoenix to get to those wires
    .
    Nope box's don't come out
    Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
    910-722-0001 call or text
    info@drewcraft.com

  10. Member
    Join Date
    Oct 2008
    Location
    Campbellsville, KY
    Posts
    4,367
    #10
    How did you get to em? I had bluewaters on my triton and ran my arm as far as i could from the battery compartment and drilled the hole there. I assume you soldered some extra wire to your leads so you could run them to the battery compartment to run them in a parallel
    They aint got hands, set the hook

  11. BBC SPONSOR / PHOENIX MOD DREWTICK's Avatar
    Join Date
    Mar 2014
    Location
    Vass, NC
    Posts
    7,827
    #11
    yes the wires were extended and prepped first, I then used a wire fishing tool from the hole to the battery compartment and the light is siliconed in
    Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
    910-722-0001 call or text
    info@drewcraft.com

  12. Member
    Join Date
    Jun 2015
    Location
    Abingdon, MD
    Posts
    339
    #12
    Quote Originally Posted by DREWTICK View Post
    yes the wires were extended and prepped first, I then used a wire fishing tool from the hole to the battery compartment and the light is siliconed in
    WOW Drew, great job!!! I'm inspired. Great idea to light the TM tray.
    2000 Bass Cat Pantera Classic
    Mercury 200 EFI (0G374590)
    26P Trophy Plus / Garmin Force / Garmin EchoMAP / Dual Power Pole Pro Series II

    "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety."

    - Benjamin Franklin

  13. Member
    Join Date
    Mar 2015
    Location
    Lansing, MI
    Posts
    49
    #13
    Hey guys use coupon code Mike Barker on oznium.com to get 10% off your order!
    2012 Triton 21HP Elite
    Mercury 250 Pro XS
    Humminbird 1198x2 & 898
    Twin Power Poles
    Atlas jackplate
    Motorguide Tour 109
    Humminbird 360

  14. BBC SPONSOR / PHOENIX MOD DREWTICK's Avatar
    Join Date
    Mar 2014
    Location
    Vass, NC
    Posts
    7,827
    #14
    Well let's see? What else can I light up?
    Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
    910-722-0001 call or text
    info@drewcraft.com

  15. Member Cpcat's Avatar
    Join Date
    Apr 2013
    Location
    Brandon, MS
    Posts
    1,987
    #15

  16. Member crank68's Avatar
    Join Date
    Mar 2011
    Location
    Kenly, NC
    Posts
    17,416
    #16
    Great install !!!
    BULLET 20 XRD/250 Merc Sport XS
    www.ncboatguy.com