Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Jan 2015
    Location
    Tampa
    Posts
    651

    2013 Z118 Bow Tool/Cup Holder Option

    I am sure someone has posted a similar addition to their boat, but incase not, here is an option for those who would like a cup and tool holder in the X18 series boats. For me, I wanted a cup holder and tool holder, but I HATED how the trolling motor harness would cover the bow HDS screen. With this style holder it routes the TM harness to the left of the screen. I did have to move the TM foot pedal aft, but as you see it in the picture nothing rubs anywhere.

    This bow tool holder is for the Nitro's and is part number 188896, basically $28 for everything. It is about 1" too wide for the recessed tray, but I cut mine right where the bungee cord passes on the right side and it fits perfectly.






    Hope this helps someone out.
    Last edited by cfm56doc; 05-06-2017 at 03:13 PM.
    2013 Z118 w/Merc 150 4S

  2. Member
    Join Date
    Jan 2014
    Location
    Elkland, Pa.
    Posts
    576
    #2
    Nice job, looks great.