Like to know if anyone with v20 2015 still having problems with holeshot.
Like to know if anyone with v20 2015 still having problems with holeshot.
I put a G2 250 on my v21 and the hole shot is the fastest of any boat I've owned or been in. It's crazy fast.
What do you top out at with the G2? Likewise, my holeshot is great with V20 250 SHO 24 Fury prop..
Have mercury 250 opti on my 2015 v20 24 fury top speed not go ether. I have one of the first 2015.
When tournament loaded 15 to 18 sec to get on plan
What kind of top end are you getting with the SHO and the 24 Fury? I'm running the SHO and a 25 T1. Zero hole shot issues but I'm not turning enough rpms at WOT. Only 5500-5600 at 72 mph.
Loaded in bump around 68-70. Light around 72.. right at 5900 rpm. I couldn't turn the 25 T1 it came with either.
Boobie.. What do you see for top end RPM with the 24? I had an issue years ago with reeds that made the motor not want to get out of the hole, but it would run top end no issues. My 2016 V20 has a 3-5 second hole-shot loaded.
If you're running a hydraulic plate, raise it all the way up. Drop it down as it is breaking over. On my Atlas plate, I start off with it all the way up and lower it to 12 or 13.
I won't buy new unless I get a sweet deal but I really hope I can find a beautiful 211r or v20 with a 250 g2 when the time comes
Nitro z21
I've really enjoyed my G2 so far...The torque is amazing.
Chris l have 5900 rpms
Boobie..a motor with a bad reed bank will turn rpm but won't have any low end. If the motor is checked out it needs to be leak tested. If it's not the motor then call Legend! Ask for Kody or Pete. A 15-20 second holeshot is just not right..
Working with Legend to resolve this problem
Excellent! I hope things turn out well!
I really like the way legends are made but I am have trouble with the holeshot hope it gets resolve soon
"Never argue with an idiot; He will beat you to death with stupidity"
Yes but if you put the 25 4 blade what happens to top end already only at upper 60's