I removed my depth finder on the console is there any place that can make a cover for the hole? Thanks
I removed my depth finder on the console is there any place that can make a cover for the hole? Thanks
I can help you out, if you don't find anyone.
I have two plates from a Ranger 520C that I would sell.
Do you know what size they?
I went to a local sheet metal dealer that had some aluminum in stock and had the make me a 3/16 in cover. I had some spray on Rustoleum bed liner I finished it up with... Just a thought... Dan
Go with beach cues. He makes some great stuff!!!
You can find 4" diameter, 1/4" thick aluminum discs on ebay too.
Kevin | 2000 Champion 191 | 2000 Yamaha OX66 200hp
I put a Jensen AM/FM /weather radio to fill the hole . It also bluetooths music from my phone. It sounds half decent and looks good. Know I don't play while I'm fishing but in the garage or while working on the boat its great. The weather station is a plus. For the sixty bucks it works for me.
1995 CHAMPION 171 DC
Go get $7 cutting bord at Walmart cut yourself works great and many colors
I used one of these on my boat to fill the old depthfinder hole
http://www.ebay.com/itm/STANDARD-3-3...item2eb10cbe76
i ordered black starboard cut to size from here http://www.boatoutfitters.com/cut-to...king-starboard
'98 187 Elite, 175 EFI (Serial 0G750796)
Ed R.
2006 ChampioN 198 225 Optimax
Dustin W. - Alvin, Tx
1996 ChampioN 202 Elite DCX
Mercury 225 EFI
The top two are factory covers that I had dipped here. https://www.facebook.com/h2odip
The bottom I made, then sent to the same to be dipped.
Pretty sure member "beach cues" above can set you up with similar covers.
Ed R.
2006 ChampioN 198 225 Optimax
20150831_203442.jpg
Here is one I made, don't have many picures on my phone
If "beach cues" is willing to do it for you. Do it!! He does great work!! It's very generous of him to make such nice pieces for the Champ family. I don't have anything from him, but have seen his work. If I ever need anything, I'll be begging him for his talent.
Champion 206
250XB
I installed a stereo in mine.
2000 ChampioN 202
225 Mercury EFI
For the Champ owners with the large "squarish" bow and console holes.....
Pretty sure this is the correct panel. The back of the panels on my Champion had Stratos stickers on them. You could call C&O and ask for the measurements.
http://www.teamcandomarine.com/eshop...over_Panel.htm
The measurements on the above panels are 6-3/4" X 5-5/8".
Ed R.
2006 ChampioN 198 225 Optimax