Ths latest (18.2) us a no-go with Gen 2s in the network, so the latest you should update to is the one before the current one. Don’t remember the number though.
Ths latest (18.2) us a no-go with Gen 2s in the network, so the latest you should update to is the one before the current one. Don’t remember the number though.
In freshwater there is litle to fish for at those depths here in Norway. I fish for arctic char (Salvelinus alpinus) down to around 160 feet but most of the fishing is done in 3-40 feet, though often pelagic over far greater total depth.
I fish in saltwater as well, and there we actually fish at the bottom at depths of 1500-2000 feet.
Question for the group. I am ordering a new boat that will have Carbons and structure scan. Should I get the 3D ducer instead of the LSS2? I don't care about the 3D part so can I just get the ducer and not any extra "box"? What would I lose as compared to the LSS2?
Thanks guys...I would love to have that clarity
2019 721 ProXs 4S 250
2B599739
I would not buy LSS-2 at this point. Go for SS 3D (and yes you do need the module regardless of how you use the ducer) or wait until the new «2 in 1» is available and the new software for Carbon making it compatible with «2 in 1».
2019 721 ProXs 4S 250
2B599739
I haven’t tested it with Gen 1s so I have no idea. I would guess yes, but don’t count on it.
Hoping you might be able to help me with this. Based on this string, I went ahead and got the structurescan 3D module and transducer. Previously I had the structurescan HD with LSS2. My head units are both Gen 2 non touch, HDS 8's (one front, one console). Their software is updated to the most current version 45.2.200. My StructureScan 3D is S3D-61.1.123 28:2D:C5. I just installed everything and took it out for its first run and had an issue. My downscan won't work at all and no depth is displayed. My sidescan works perfectly and I immediately noticed the increased range, but no downscan. My range is set to auto. The lights on the module are green blinking, indicating that its searching for bottom. Im worried that my 3D module may have been updated to a software version that makes it unusable with my Gen 2s, or perhaps something is wrong with the module or transducer? Any help you could provide would be greatly appreciated, as I know the folks on this thread have a wealth of knowledge on this topic.
Any 3d software 18.2 and above the gen 2 wont work on. 4.0-59.1.72 is the last known software version to work with the gen2. You 3d software is 18.2 or 18.3 right now. I know 18.3 on mine i have nothing on the gen 2 no side or down. Just find the 4.0 software and install it.
Thanks for the response. 2 questions regarding it. Any ideas where I could find the 4.0 software? I couldn't find it on the Lowrance site. Is it archived somewhere? If Im able to locate the 4.0 software, will I be able to update the module using a Gen 2 head unit?
TEAM COLIBRI: Ihave a quick question ? a friend of mine has a extra active imaging 3 in 1 transducer. so if i plugged it in to the gen 2 hds 10 structure scan black box , do you think it would work on the gen 2 10 unit or blow something up? lol It looks like i would need a nine to 7 pin adapter cable to make it work. but i have one of those too.. lol any ideas would be nice..
If you're still looking for it, the 4.0 software can be located at the following link. Not sure about being able to use the Gen 2 head unit to downgrade the 3D module.
ftp://software.lowrance.com/Structur...Standard-1.riw