Results 1 to 11 of 11
  1. #1
    Member
    Join Date
    Jul 2016
    Location
    Shelocta, PA
    Posts
    21

    Procraft 200 Super Pro trolling motor options

    What shaft length and volt rating trolling does this boat take, Thanks!

  2. Member
    Join Date
    Sep 2014
    Location
    Oklahoma
    Posts
    798
    #2
    You could put whatever you want on there. Not sure what you best shaft size is, but my 210 has a 105 36 volt with 50 inch shaft. I might have done the shorter shaft and been okay, but when I get in rough water I'm glad I have the extra 5 on length.

  3. Member
    Join Date
    Sep 2014
    Location
    Oklahoma
    Posts
    798
    #3
    I would assume factory it was a 24 volt 74lb thrust maybe. Can't see them rigging it with a 12 volt

  4. Member
    Join Date
    Aug 2010
    Location
    Brooksville Fl
    Posts
    753
    #4
    I have a 210 PRO. have a 24v 74 lbs MG 50" shaft . works good.
    Last edited by GamblerAl; 07-30-2016 at 03:58 PM.

  5. Member
    Join Date
    Jul 2016
    Location
    Shelocta, PA
    Posts
    21
    #5
    Ok thanks! Still not sure what I might get, Didn't know they made a 12v motor with 74lbs.

  6. Member
    Join Date
    Aug 2010
    Location
    Brooksville Fl
    Posts
    753
    #6
    You Don't went a 12v.

  7. Member
    Join Date
    Jul 2016
    Location
    Shelocta, PA
    Posts
    21
    #7
    That's what you said you have and it works good, or is that supposed to say 24v?

  8. Member
    Join Date
    Aug 2010
    Location
    Brooksville Fl
    Posts
    753
    #8
    It should say 24. Well it does now.

  9. Member
    Join Date
    Feb 2011
    Location
    Munson, PA
    Posts
    182
    #9
    I have a 200 SP and curecently have a 80lb Minn kota maxxum works good. I'm looking to upgrade to a 112 fortrex if I can stuff another battery in the rear port compartment

  10. Member
    Join Date
    May 2007
    Location
    Horseheads
    Posts
    97
    #10
    Did you ever add a 4th battery to your boat? if so, where did you put it and the charger? Would love to see pics if possible.


    Just a guy tryin\' to get to the next level...at everything I try.

  11. Member
    Join Date
    Jul 2010
    Location
    Bowmanville
    Posts
    92
    #11
    My 2001 Super Pro 200 is factory wired for 36 volt and I believe my Fortrex is a 52.