Been look for the spec on the length and width of the 719 and 619 on the trailer, but can't seem to find them anywhere. I figure they have to be close since the hull is the same size but didn't know how much of a difference the different trailers would make. Want to be sure it will fit in my garage. Anybody have these measurements or know where I might be able to get them?
Storage length will vary depending on what motor you put on it. Call or email Jeff at the factory and he can tell you exactly.
My YouTube Channel: http://www.youtube.com/user/ScottMcGehee
Jeff can probably give you detailed lengths.
You can use this for ballparking.
Boat length (swing away trailer on Phoenix Boats puts the trailer the same length as the front of the boat) + jack plate setback + 2 feet (engine)
I think Yamaha engines set back a little farther (add another 1/2 foot) and I am not sure what the SHO would be if that is waht you are considering.
Kenneth
Jeff will be able to help you on the exact numbers. I have the 618, which is the same width as the 19' models, and it fits in an standard single car garage. That's about 109" wide, but it is tight, especially if you have limited driveway space and have to make a 90 degree turn like I do.
I almost pulled the trigger on a 619 before the 618 came out, and I'm glad I waited! Once I get the Merc all of the way up against the wall, I have about 6" of space in between the bow and garage door. Otherwise I'd have to either cut some sheet rock or go house shopping
Reply With Quote