2013 Phoenix 721 ProXP
For the guys with RAM issues, I have 10" units that do not budge on my Large RAMS (2.25 ball diameter), ever since I started
using this:
http://www.rammount.com/part/RAM-KNOB9HU
Flush mount simply looks better, but I won't do it. I simply will not cut a hole in the dash for something I am going to change every few years and the shape is going to change. Yes you can cover the original hole with a filler panel but I think that looks shoddy. I mount my electronics on Balzout mounts and leave the dash for other things like gauges and Merc Monitor. Things that use standard hole sizes and I will keep for more than a couple years. I currently have my Merc Monitor dead center of the dash and I like it that way.
If it fits the op application the ram swing mount is best i have used
yes 2.25 inch ball and 11 inch arm
Thanks guys! I ended up running 4 units so I'll have units both flush and ram mounted but I'll probably use a product like the one from TH marine.
I use RAMs piece of mind knowing my units are secure either in my truck, hotel, or house and not just sitting in the elements etc. Cost too much $$$$ for me
2015 Legend V20
250 ProXS
Lowrance HDSLIVE 12s/16
BBC Member since 2003
For the money, these are hard to beat. Currently running one on the bow with a Helix 12 attached and it doesnt move.
http://www.stabil-mount.com/Product.php
I have the 2.25 inch ram mount with the short arm on my Helix 12 and it does not move. Guess I am lucky.
2013 Lund 2010 Pro Guide, 150 Verado SN:2B024387
2X Helix 12's Mega G2N's, Lvl. 2 Merc Monitor