Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Aug 2012
    Location
    Fayetteville,Tennesse
    Posts
    162

    2d reading at high speed

    I have a 1997 200 pro vee with a hummingbird 1198 with a shoot through transducer. The transducer is back as far as I can get. It works fine when I am running below 35 mph but when I get past 35 it lose reading. Sometime it will read the depth say 80' but no 2d most of the time it reads 1.6'. I have put water in the sump but did not change. Do any of you Bee owners have this problem?

  2.  
  3. Member mrlawler1's Avatar
    Join Date
    Mar 2010
    Location
    Center Star, Alabama
    Posts
    11,310
    #2
    Mine runs as expected...like it's supposed to...
    D and D Marine
    2015 Skeeter zx250. 250 SHO..
    Power Pole, Lowrance, Hydrowave..

    Off to the Pit of Misery
    Dilly Dilly


    Matt Lawler

    “If you want to walk the Heavenly streets of gold, you gotta know the password, “Roll Tide Roll!” Bear Bryant

  4. Member KILL3R BEE's Avatar
    Join Date
    Jan 2014
    Location
    Knoxville, Tn
    Posts
    363
    #3
    i occasional loose readings...could be a loose connection at the head...depending on how much you take it on and off, the connections will wear out...kinda like a trailer wire connection...similar contacts, but much smaller...or may have to re-seat the puck with new epoxy...air bubbles in epoxy will also give you false readings