Phoenix boat cover questions?

[JackJ]

I did not get a TM prop cover with mine, but in that area it seems to be extra reinforced.

[ShawnD]

I believe you should have, I did and it's also beefed up.

[THKUSTOMS]

I don't have the cleats issue, did you not get the TM prop cover that came with the tarp? It's white and has Velcro.

I dont think so... The one the wife made is nicer anyway...

[Scooters619]

The Atwood cover is the BEST cover I've ever used...PERIOD!

[bubbanugent]

What is the 3rd pole for

[Nwaangler]

I'm taking boat to deans have them make me a custom cover. Phoenix is suppose to come out with new cover for the new dual dash but I have not heard from Tim yet. I have a 12 on bow also and I'm not taking it off unless I have to.

[DREWTICK]

What is the 3rd pole for

goes in place of passenger console if you done have one. there is a plastic piece for it in the cover

[bubbanugent]

What is the 3rd pole for

[Bigdawgbass]

Same thing with my cover. Tim and Phoenix service are number one. Bar none

[Fidgetcranker]

I trailer with mine 100-300 miles no problem. I do take windshield off

^^^with 921. Even with poles set up the cover does sag from the wind when trailering, BUT never a problem coming lose, or stretching out of shape. They are excellent covers. Do not tighten ratchet straps as much as you can, the results will be the same while towing, and having them too tight will only risk a tear somewhere on the cover.
Be sure to remove windshields as above and lay a towel over console electronics.

[vausoner]

Second post was from Tom. I had forgotten about him.

[DREWTICK]

[921screaming250]

very nice,still fits like a glove with ultrex

[jbp84]

Mines a pita to get unlocked. I didn't know about the trolling motor cover either.

[rakkc]

Love the way the cover fits on my 2016 921 - actually getting ready to make a 11 hr one way tow out to CA. will tow with cover on if the weather is bad.

Only issue I had was the first time I used it , covered the boat for the evening, the next morning when I took the cover off it left some white watery milk like spots all over the boat - someone else posted on bbc said that was due to covering the boat when it was hot outside before the sun went down, evening temps cooling off and this caused condensation on the inside of the cover - way to prevent it in the future they recommended was to plug the vent holes. I laid the cover out and washed it really good inside and out with dishsoap and water - no more spots.

[21XRD]

I also did not get a TM prop cover with mine. While were on covers what is something good to spray on the cover to protect it?

[kry29]

I sprayed mine down with 303 fabric protector. I'm pretty sure I read that was the best stuff on the manufactures website. It was on a cover manufactures website, I do know that.

[bgproudfew]

Not trying to jack the thread, but where can I get the actual support strap system for a 2016 920 cover. I have a cover but do not have the support poles and straps.

[vausoner]

Not trying to jack the thread, but where can I get the actual support strap system for a 2016 920 cover. I have a cover but do not have the support poles and straps.

Call your dealer or get in touch with Tim.