Could anyone tell me the package length of a nitro 901 with swing away tongue and no transom saver? Trying to see if it will fit in the garage. Thanks
Could anyone tell me the package length of a nitro 901 with swing away tongue and no transom saver? Trying to see if it will fit in the garage. Thanks
Funny you should ask, I just measured one last night, and with a 200 Optimax it measured about 22 feet from the front to the back of the motor, just barely fit in my garage.
My garage is 20 foot long and it fits in on a angle with plenty of room, it will even fit with the swing tongue straight out also. And that is with a 10" jackplate.
Modified by Nitro Bob Rourke at 4:48 PM 12/31/2011
Gambler 2200/250 Pro XS
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by firefish7414 »</td></tr><tr><td class="quote">Was that 22 ft with the swing away tongue back</td></tr></table>
I would definetely think so, you will have to make sure if he has a jackplate or not that could make a 10-12" difference. Under normal circumstances i would go measure my 901 for you but i tore my petala tendon and had surgery yesterday so i can not walk for the time being. For some reason i thought it was just over 23 feet with a 10" jackplate but i am not for sure.
Gambler 2200/250 Pro XS
I just read on the internet that a 901 21-10" overall with the swing tongue to the side. The boat that is saw this on did not have a jackplate, so you will have to figure that into the equation.
Gambler 2200/250 Pro XS
22 feet was with the swing tounge to the side and a jackplate with the motor trimmed down