Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jul 2009
    Location
    Oxford
    Posts
    74

    98 nitro 700 Lx sc 75hp merc tracker HELP..

    I just purchased a 98 700LX and I was wondering what prop should I have on this Combination and what RPM at wot. This boat is for my son and want to set it up for him. should I go aluminum or SS.


    Modified by Stratos285PE at 11:42 AM 10/31/2011

  2. Member CigarBasser's Avatar
    Join Date
    Jan 2010
    Location
    Fayetteville
    Posts
    9,547
    #2

    Re: 98 nitro 700 Lx sc 75hp merc tracker HELP.. (Stratos285PE)

    I have a Nitro NX 750 DC with a 90HP Merc and run a SS SOLAS 13x21.. Pushes my boat on average 43 MPH running around 5400 RPM..

    Hope that helps.. if not throw your question on the Props or Merc forums..

    Here's a recent post I made as well..

    http://www.bbcboards.net/zerothread?id=738306

    Dave
    2001 Ranger 518DVX Comanche / Mercury 200 Opti (OT306368)

  3. Member
    Join Date
    Feb 2011
    Location
    Ivor, VA
    Posts
    235
    #3

    Re: 98 nitro 700 Lx sc 75hp merc tracker HELP.. (Stratos285PE)

    I have a 170DC with a 90 mercury tracker. I also have a 13 x 21p, it is made by Apollo. It pushes my boat at 42 at 5400 rpms. Before this prop I had an aluminum 13 x 19 I believe. Around the same top end but much faster out of the hole with the new ss.


    Daniel Little

  4. Member
    Join Date
    Jun 2007
    Location
    Bel Air, MD
    Posts
    382
    #4

    Re: 98 nitro 700 Lx sc 75hp merc tracker HELP.. (SwampBass)

    I have the same setup...I run a SS 22p Laser II, 5200 @ WOT, 44mph
    02' 2100SC-250xB-Dual 12' Talons

Similar Threads

  1. Tracker/Nitro Wiring codes.
    By BMCD in forum Nitro Boats
    Replies: 25
    Last Post: 04-15-2023, 05:48 AM
  2. Nitro 700lx /Merc 75 Prop suggestions....
    By ckusnierek in forum Nitro Boats
    Replies: 9
    Last Post: 01-07-2012, 03:46 PM
  3. Replies: 10
    Last Post: 05-26-2009, 02:47 PM
  4. Replies: 4
    Last Post: 03-11-2008, 03:09 AM