-
Member
Fender spacer dimensions
For those of you who have raised their glass fenders to create more space for wheel/tire travel what were the dimensions of the spacers you made?
2018 z21
-
Member
After thinking about it just gonna go to Home Depot and get myself a piece of 3/4" composite decking and cut to specs. Stuff is strong and easy to work with.
-
Moderator
Some of that stuff absorbs water especially if submerged. Make sure your stuff doesn't have wood fiber in it.
-
It's a winter project for us. I've heard guys using horse mat. I only need about 1/2" and that should be plenty. A full sheet is about $30. The other option it to get small rubber mats through Fastenal or McMaster Carr.
-
Member
It's done and I'm happy so far. Didn't get the composite deck boards. Went with poly 5/8 cutting boards. Super easy to cut and figured it can't really deteriorate and creates a decent buffer between the glass and metal. Was a hour and a half install from start to finish with all new hardware. Oem hardware was not stainless and seized up so a torch made light work of the lock nuts. Used 3m spray adhesive for the mats and all SS hardware. I now have enough clearance and total cost to me was $36.