Looking to add a trim switch to the steering wheel.....where would this be noted on the thread above?
I have a 2011 Z8 and digging into the bow wiring, I find two sets of wires that look the same, and one is wired to the factory depth finder. Being simple minded as I am I suspect they provide for two locators?
I have a '15 Z9 that I am putting Blue Waters on - is the wiring code posted here valid still? All lights are in place I just want to make sure that I tap into the right power.
Any help would be appreciated!
C4F
C4F,
When I did the Bluewaters on mine, I ran all the wires for all the lights and used the Courtesy light in the bilge as the power source. This allows me to turn them on with the touchpad.
http://www.bbcboards.net/boat-traile...intensive.html
Jimmy Young
2021 Nitro Z19
Mercury 200 ProXS
Atlas 10" Hydraulic Jackplate
Humminbird HELIX 12 CHIRP MEGA SI+ GPS G4N
Humminbird HELIX 8 CHIRP MEGA SI GPS G3N
Humminbird HELIX 12 CHIRP MEGA DI+ GPS G4N at bow
Humminbird HELIX 8 CHIRP MEGA DI GPS G3N CHO at bow
Humminbird MEGA 360
Minn Kota Ultrex i-Pilot Link
Dual Power Pole Blades
Hey, guys.. I just signed up for this, due to me being a new, first time, boat owner.. could anyone here help with some question I have about an 2004 nitro 901 cdx?
Jimmy Young
2021 Nitro Z19
Mercury 200 ProXS
Atlas 10" Hydraulic Jackplate
Humminbird HELIX 12 CHIRP MEGA SI+ GPS G4N
Humminbird HELIX 8 CHIRP MEGA SI GPS G3N
Humminbird HELIX 12 CHIRP MEGA DI+ GPS G4N at bow
Humminbird HELIX 8 CHIRP MEGA DI GPS G3N CHO at bow
Humminbird MEGA 360
Minn Kota Ultrex i-Pilot Link
Dual Power Pole Blades
Can we get a trailer wire diagram explaing what wire is what
The trim down switch on my 2006 Nitro 482 will not work.. Trim down works fine. Trim up/down work just fine on motor and throttle handle. I tested the bow switch by swapping wire sets on up/down and the down works but still not up. Is there a fuse or most likely a broken wire somewhere?
i Have a 2005 nitro nx 750 DC, i am having a few electrical issues, what would be the best way to tackle the fuse box and find out where everything is wired in?, im also replacing the original fish finders with two new helix 5 units and if anyone could point me in the direction to help with install and wiring that would be great i am new to the forum.
2018 Nitro Z21
Mercury Verado 250 Pro/24P Fury 4
Lowrance HDS 12 Carbon at bow/Gen 3 at console
Minn Kota Ultrex 112/2 Minn Kota Talons 12’
Hopefully, this will help others. Been working on my used 2000 Nitro 929 CDX since I purchased in mid 2020. Wiring is quite a mess underneath my console. Seems there are more wires then actual devices. Lol. I’ve dealt with voltage loss at my fuse box (fixed). Been working with the wiring guide to identify my fuse box. Here is what I know. B1323538-4D9C-4207-B712-15C4978174AC.jpeg
Hi 👋 I purchased 2000 Nitro 929 CDX from FB market place supposedly to be tournament ready. Motor blown just on 2nd time I took it out. Had motor rebuilt since then, but everything thing on this boat and trailer need fixing. This is my very 1st boat and I’m clueless so any help will be greatly appreciated.
- Do you have or know where to get repair manual from?
- Wiring is a mess on my end but no fuse box. Just wires dangling underneath driver console with inline fuses
- livewell pumps work when tested outside of boat but they don’t work after installation, maybe switches need replacement?
- Where do you buy parts for this ancient boat? I have a list of things and parts that needs fixing and I can’t find part numbers or origin of issues in some cases
- Same with trailer. Do you know what the right part # for the hub assembly kit and rotor hub kit?
- Nav light’s don’t work
- Dash gauges don’t work except RPM
It is a big mess 😩
Anyone have the latest generation wiring diagrams?
2020 Nitro Z20 Pro Package
Hi would this be the same diagram for a 2005 nitro bay boat built by Kenner boats thank you tim