Thread: Railings bent

Results 1 to 4 of 4
  1. #1
    Member larryhyco's Avatar
    Join Date
    Oct 2011
    Location
    Semora, NC
    Posts
    2,647

    Railings bent

    Daughter went under a low bridge with the folding top up and bent all of the rear railings. The boat shop the boat came from said they couldn't get the replacement rails and skins. They want to sale me a new boat. Has anyone bought railings from the company's on the internet that sells them. Thanks for any help. (2003 Harris Sunliner)

  2.  
  3. Member
    Join Date
    Nov 2012
    Location
    Muscle Shoals, Alabama-Wilson Lake
    Posts
    8,076
    #2
    Check with PontoonStuff.com to see what they have. GreatLakesSkipper.com has been known to have pontoon parts on their lot in Racine, WI.

    Your boat is too new to just scrap. You might want to measure the size of your tubing before you start looking. Sometimes a good welding shop can cut out the 1 1/4" anodized tubing and replace some of it--rebuilding your old fencing. And once the fencing is all fixed, they can re-skin the fencing. The hard thing is removing all the old fencing--requiring removal of all seating and the trim around the deck. Then you can reach under the fencing to remove the nuts and bolts holding the fencing on.

  4. Member
    Join Date
    Sep 2009
    Location
    Fairfield
    Posts
    22
    #3
    Give these guys a call, should be able to help you. http://www.kustompontoonfence.net

  5. Member
    Join Date
    Aug 2016
    Location
    North Mississippi
    Posts
    5
    #4
    I've bought a panel from this place before. http://pontoonfence.com/