FROM A OLD GOAT SIR THAT IS A NICE BOAT
FROM A OLD GOAT SIR THAT IS A NICE BOAT
JUST GETT N USED TO THE HOT FOOT IM STILL OUT BEFORE I DECIDE ALL MY OTHER RIDES HAD STICK CONTROL IM 60 SO U CAN IMAGINE THE CHANGE FORMER RANGER MAN
GOT A V L 475 T WHAT IS THE DIFFERENCE PLEASE
HAVE A V L 475 T THAT TOOK THE PLACE OF A LOST RANGER 150 MERC OLDER RIG BUT JUST RIGHT FOR AN OLD GOAT NEED N A BOAT
My 1997 hydra sport Ls 185 great old boat with a 1997 Johnson Fastrike 176
Last edited by Hydrasport la185; 06-29-2019 at 11:27 AM. Reason: [QUOTE=Hydrasport la185;10370652]My 1997 hydra sport Ls 185 great old boat with a 1997 Johnson Fastrike 176[/QUOTE]
My 1997 hydrasport ls 185 with factory 175 Johnson Fastrike
My 1997 Hydrasport LS185
Hey I need help getting theses pictures and post
My1997 ls 185 Hydrasport with a factory Jonson fastrike 175 great old boat truck D751CAFF-500C-4A3E-AF50-D29264100E55.jpeg
I kept this 1990 DV220 for 20 years 1996-2016 and it was still good when I sold it. Had a VL475 kevlar hull w 150 Mariner from 1986-1996.
Used both as guide boats on Lake Okeechobee and never tore out a lower unit. Lucky man.
Got out of Fl in 2016 and now do my boating on the Ohio River in a Ranger 1880ms.
We just got her and she seems to be a unicorn. We'd never even heard of a vl75 before. And unusual serial 1xb11. Any hydra masters wanna tell us about what we have?? Thanks so much! And woah.... love your boats!!
Dave
1994 Z255 with 60hp Johnson. May be a small one at 16ft, but she's been a great on. Had it re-carpeted 5 yrs ago, replaced the seats, and added some Birds, and lots of small tweaks.DSCN1334.JPG
20200407_123907.jpg
1996 Hydrasports 185 still have some things that need attention but overall a great boat. I don't really like the rod locker though. I tend to get rods tangled at times
IMG_5126 2.JPG IMG_5127 2.JPG 1984 Hydrasports vl270 with Mariner 150. Clean boat for the age, outboard runs great! I'm wondering if any one can give me some tips on upgrading for some reason my RPM gauge works although my speedometer does not. Also, I'm looking to change out the seats. Is it possible to install a bench seat instead of (2) singles. Please, if you have any info feel free to share. Thanks.
Very nice 270. I have an 1983 that I am working on.
Is that a small section of aluminum under the rear seat base? Mine has cracks and I added a sheet of diamond plate but thinks it needs a little more support. Do you have anymore close up pics of the boat.