Looking for some dash switch panels for a 2005 Champ 198. The switch panels on the dash are the same for a 196 or 198. Mine are broken and I would like some new ones.
Looking for some dash switch panels for a 2005 Champ 198. The switch panels on the dash are the same for a 196 or 198. Mine are broken and I would like some new ones.
maybe C/O Marine might be able to hook you up. http://www.teamcandomarine.com
I have this set it is brand new I ended up going a different route with my old boat and never used them. $120 tyd.
Is that an early 05 model? HIN would tell month built. They did change console styles not long after the first 05s came out. My 2005 198 does not have an adjustible timer switch.
They're the same as my 04 188
Larry Eby, 2004 ChampioN 188 Elite/2003 200 Hp Vmax OX66
"Romans 10:9"
Payment made...Thanks Joe!!!
Careful torquing them down. Would almost think about using rubber washers under them to decrease the vibration and torque. Seems that the design had great intentions just didn't plan on the stress created on them from being so thin. Doomed to split and crack.
Larry Eby, 2004 ChampioN 188 Elite/2003 200 Hp Vmax OX66
"Romans 10:9"
Totally agree!! When whoever molded them built the mold, it would have been easy to build up a shoulder on the back side of the hold to match the outer rolled edge. The shifter cover on my 210 cracked all out. I was able to send it to Mark Miller at Poly Fab and he cut me a solid piece that works great. If you didn't know it was different, you'd never notice it.
That looks OEM! Use an adhesive remover to take the warning sticker off if the original plate and re-adhere it to the new plate.
Larry Eby, 2004 ChampioN 188 Elite/2003 200 Hp Vmax OX66
"Romans 10:9"
Gonna revive this post...I need another set of these (or at least the long one if you have any). Let me know what you got
.Thanks!!!
It seems I read a thread that used newwiremarine to fab a new panel. I can’t find the thread.
Larry Eby, 2004 ChampioN 188 Elite/2003 200 Hp Vmax OX66
"Romans 10:9"
You can contact Mark Miller at Polyfab he's a BBC sponsor and he can fabricate some for you.
http://r.search.yahoo.com/_ylt=AwrBT...mmMkpxI6C.XvM-
I don't know a lot about 3d printing but I wonder if it's possible to print these panels ??
1995 CHAMPION 171 DC