Oznium Install Complete

[CastingCall]

The lens looks like it gives a nice focus to the beam.

[Basstronaut]

The Oznium Website has NOT been designed by some professional company....so it's not as "cool" as say....the new Bassmaster site.

It reminds me of the Jan's Netcraft website.

It does show detailed pictures of the different color lights as well as their beams with and without lens. I purchased the ones with the lens because of the beam focus. Without the lens the beam is more "rounded" I believe.

[BB']

Awesome install! Looks Great! Just curious why they cant be ran in series?

[z7master167]

I wanna get these, but ive searched and cant seem to figure out how i need to wire them would like to do 6 or 8 on front deck and 4 on back... can someone please explsin the wiring to me thanks

[CastingCall]

I wanna get these, but ive searched and cant seem to figure out how i need to wire them would like to do 6 or 8 on front deck and 4 on back... can someone please explsin the wiring to me thanks

They need to be wired in parallel, ​so each LED will get 12volts. Run a positive and negative wire (pos from fused switch, neg from battery/ground buss) to the first LED, and connect it pos to pos, neg to neg. Continue another pos and neg wire from each of those LED connections to the next LED, and so on.
Here's a web image - notice you'll have three wires coming together at each connection point.

[Kerry201pro]

Joshua did you use a dimmer? Also can you share the gauge wire you used? Your install rocks man! Looks super sweet!!!!! Thx for sharing!

[kraetzer]

" notice you'll have three wires coming together at each connection point"
Do you have to solder those connections or is there another way?

[Basstronaut]

I used 18 gauge speaker wire. I had a huge roll and speaker wire is pretty good quality.

There are only 2 connections at each light. Just as the wiring schematic above shows for parallel.

Just think, you need a positive from the battery, you tie all of your positives into it.

Second you need a negative wire coming off the battery and you tie all of the negatives into it.

I did not wire in a dimmer, but I may because I would like the control over the brightness.

[mickskin]

Which model of light are these, they look smaller than anything I can see on the sight.

[Basstronaut]

Oznium "Bolt"

[Dantzx190]

Nice job,
After seeing how clean your installation looks i'm going to do the same thing

[ehaws]

Looks Awsome. Great job. Just did some led lighstrips ony Ranger. I posted it under Ranger led light upgrades.