Power pole bushing replacement

[mike464]

I'm getting ready to replace the bushings in the 2 lower connections on a set of pro series IIs. Is there any tricks or disconnecting I should know about before I start?

[Hydrilla Gear]

Thats a pretty straight forward job. Sometimes another set of hands can make it easier.

See link

https://hydrillagear.com/wp-content/...1_02.25.15.pdf

[mike464]

Thanks!

[mike464]

All done, easy job. If your poles are loose, the 2 lower bushings need replacing.

[PowerPoleTech]

Be sure to keep those lower two bolts snug and the bushings should last a long time.

[GhostComanche]

Be sure to keep those lower two bolts snug and the bushings should last a long time.

PPT., could you post a pic of the lower bolts...................I think I know which ones, just would like to make sure Sir........................Thanks for being here on the board and supporting us. ...........................RR

[Hydrilla Gear]

PPT., could you post a pic of the lower bolts...................I think I know which ones, just would like to make sure Sir........................Thanks for being here on the board and supporting us. ...........................RR

Here you go

[GhostComanche]

Thanks Sir...................RR