Is there any way to display voltage on the Onix units? I always had the voltage displayed on my core units at the bow so I could keep an eye on my batteries. Now I have dual Onix's at the front and other than setting a voltage alarm, I can't find a voltage reading anywhere.
Good question.
2017 Ranger Z520c "Blackout Edition"
2017 Mercury Optimax ProXS 250
HB Solix 12 G3 MSI+, Solix 12 G2 MSI+, Solix G2 MDI+, Solix 12 2d/gps, Ultrex Mega360, Mega Live
NRA Life Member
-Be sober, be vigilant; because your adversary the devil, as a roaring lion, walketh about, seeking whom he may devour-
I haven't seen it in any of the advanced menus.
________________________________________________
2024 Phoenix 21 XE - Mercury 250 PRO XS Serial #3B429919
2017 Phoenix PHX 21 - Yamaha 250 SHO
2010 Skeeter 20i - Yamaha 250 SHO
1988 Procraft 1780 Competitor - Mercury 100
You can display it but not as an overlay. Voltage can be configured on one of the menu bars when it's turned on.
You can always set an alarm to the voltage you would like a warning at.
The only voltage readout I can find is Engine Voltage for the bottom data boxes.
If you do a Search in the manual there no Voltage shown or described.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
You need to set up voltage in the data bar. Here is a video on setting Data Bar
--
http://www.dougvahrenberg.com/
BASS Central Open- Competitive Bass Angler and Humminbird Guru
Visit my website to learn about my sponsor's products, fishing tips and techniques.
Learn More About Humminbird Side Imaging Visit: http://groups.yahoo.com/group/sideimaginggroup/
So i found the database and I found engine voltages (3 of them) but none of them display a value. I'm guessing you need an engine harness through NEMA to get these to show. Hopefully in a future update.
How to show these info on any views on Helix please?
Page 220:Originally Posted by BassTracker175
https://879dd651a809fc1b59de-035169d...s%20Manual.pdf
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
It can be done but I am not sure how I did it.
Last edited by fishon396; 02-21-2020 at 07:46 AM. Reason: wrong pictures
Sorry wrong pictures above
That is a SOLIX, it's different than doing it with a Helix.
You cannot get voltage as an overlay readout on a Helix.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Sorry I thought he was interested in the Onix
Tough to keep up when some comments on a thread that is almost four years old.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Reply With Quote