promax prop on a stroker?

[cbailey]

what pitch was the 102 mph pro max? 32-33?

[esdbass]

what pitch was the 102 mph pro max? 32-33?

Something around that Chris. Scott sent it to me to try and he said he was trying to get some more pitch out of it.

[mrbassfla]

if you want holeshot, get a bravo.

that's with I said ,

[cbailey]

i figured it would be around the 33 mark, never the less, great running

Something around that Chris. Scott sent it to me to try and he said he was trying to get some more pitch out of it.

[spider1]

I ran 99.6 with a heavy load at 6180 rpms with 30 pro max

[esdbass]

i figured it would be around the 33 mark, never the less, great running

Thanks Chris. I might come back and mess with it if I have some time? That one runs like it is on rails as well, very stable locked in feel to it.

[280ssStroker]

I ran the 30 bravo 1 with 8-pvs, first run was with no plugs, boat bogged and took forever to come out of the hole. Second attempt plugged 4 pvs Was ever worse, third attempt removed 2-plugged holes with 4-with 3/4 plug, ran better but once boat fall over would rev to 5700 before hooking up. Thinking maybe I need to try the pro max.

300xs with 1.75 gears. Looking for great holeshot and not too worried about top end.

Any suggesting? Thanks in advance

[Strokerdean]

Probably need to have the prop worked for hole shot. How did it run once on plane. I run a 300xs/1.75 (currently) with my 28p hydro q4xob. I ran 88.5 at 6350 2 days ago going fishing. The motor spools up to about 5500rpm and goes. I will put my 30p q4xob on for Wed's tournament and run low/mid 90's at around 6100 rpm with the same spool up. This is solo. Were never looking for max top end as it takes a 32p or bigger but it sure is fun running 25/30 mph faster than the other tourny rigs getting to the start spot. Some think you cut them off because you passed them getting to the spot first.

[280ssStroker]

Thanks Dean, I'll send off to Mark and have him do his magic.

[Strokerdean]

Mark has worked both of my Hydro's.

Thanks Dean, I'll send off to Mark and have him do his magic.

[John Jackson]

I ran the 30 bravo 1 with 8-pvs, first run was with no plugs, boat bogged and took forever to come out of the hole. Second attempt plugged 4 pvs Was ever worse, third attempt removed 2-plugged holes with 4-with 3/4 plug, ran better but once boat fall over would rev to 5700 before hooking up. Thinking maybe I need to try the pro max.

300xs with 1.75 gears. Looking for great holeshot and not too worried about top end.

Any suggesting? Thanks in advance

Did you have it buried? Bravo's holeshot better when high, not buried.

[280ssStroker]

Did you have it buried? Bravo's holeshot better when high, not buried.

Motor is even with pad and concur, when i had 1.62 (Bravo 1 29.5) gear it jumped way better than the 1.75 (Bravo 1 30). thanks for the assistance.

[Strokerdean]

I start the day at about 1.5" above the pad and go from there depending on conditions and what I am doing.

Motor is even with pad and concur, when i had 1.62 (Bravo 1 29.5) gear it jumped way better than the 1.75 (Bravo 1 30). thanks for the assistance.

[bulletf20]

ive got 1.75 on my 300xs my 30 promax is weak out of the hole with no holes no good water to run i got 88 ive got a 27 razor 8 holes it jumps out the hole only ran it 83 so far how high are yall running your jackplate to pad

[280ssStroker]

Have not had had the chance to air it out, gville has been a little rough. Normal running is even with pad.

ive got 1.75 on my 300xs my 30 promax is weak out of the hole with no holes no good water to run i got 88 ive got a 27 razor 8 holes it jumps out the hole only ran it 83 so far how high are yall running your jackplate to pad

[Matt Mc]

Running a 29 promax but on a stock 300 hpdi w/1.62 sportsmaster. Had mark to put 8 pvs. I have enlarged 4 already and will prolly do the other 4. Hole shot is good but could be much better. I am also on the limiter around around 88. My worked up bravo is much faster.

Edit my promax is a 28 not a 29. I am not SS and have the adaptor conversion for the sportsmaster which adds a little legnth to the 20in mid.

[bulletf20]

i ran my 30 promax 93 @ 6000 with 20psi it runs like it's on rails had more in it