Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Dec 2007
    Location
    Iola, Kansas
    Posts
    445

    Question about wiring

    My 1996 Champion with a Johnson 150 Faststrike got invaded by a pack-rat this past winter. A lot of the wires were chewed through, the biggest was the cable that runs from the starter battery to the motor. I need to replace it. Any idea on where to find a replacement? I have found some generic cables that should work, but I don't know for sure what gauge I need.

    Also several of the other wires were chewed through; gas tank, nav light, etc. Any idea what gauge those wires are? Thanks.

  2. Member
    Join Date
    Sep 2008
    Location
    CA
    Posts
    3,049
    #2
    Battery cables may be 4 ga.
    14 gauge for lights, pumps and senders.

  3. Born on th Llano Estacado Tx Champ's Avatar
    Join Date
    Jun 2004
    Location
    Abilene, TX
    Posts
    20,857
    #3
    I think the harness wires are 18ga. The red wire from the battery to the console is 14ga, but it it needs replacing, I would use 12. ChampioNman can weigh in on the starter cable.